Badwolf Somehow I destroyed my Dstb-1. The main ic was killed and I measured a full short. How this happened I still don’t know. After replacing all IC’s (just to be sure) it works again. Now plugged into the ATX ST it works with IDE. And it runs DOTT without errors it seems… Did not test it yet in...

Had a look at the comments and user @user-ic6ei6yh9h mentions he uses a lightning card. So tried this as well. @8 mhz no problems. @16 mhz ide is not recognised at all. For the acsi port @8 mhz no problems. @16 mhz the issues as described earlier arise. Very strange that @user-ic6ei6yh9 has no issue...

@Badwolf
Thanks for checking it. Cool.
I indeed tested hddriver, the one from the other guy Petari or something and emutos.
In Emutos I renember to have some similar issues but it’s some time ago. The first firmware was really unstable for me.
Can ship my dstb-1 to the UK…. Would that help?

Tried Hddriver and Emutos (build in)
Also tried some different settings in hddriver.
I also have the Petari one but did not try it in this case.

Badwolf Thanks. Yes could do this but this issue is there on all ScummVM ST games (tried multiple). The TF536 was in just to see if it maybe was something else. But the TF536 runs perfectly. I assume you will see this issue if you run something which hammers the ACSI and Altram. It is so bad that i...

@Badwolf

Sorry the older firmware has the same issue.
The oldest one just crashes when I try to load Emutos from floppy (no tos decoding so need to load Emutos to see altram).

This one does run stable but the 030 means loss of compatibility.

Badwolf Found some issues 1 Because I would like to try the S2 midi module I installed scummvm ST with the Fate of Atlantis. It seems that when using altram scummst crashes (in various ways when there is HD activity). I’m not sure if this is a scummvm ST or a hardware issue. (however scummst should...

Thanks!!!!!!!

Hi @Badwolf,

You don’t need glasses even blind this seems to work.
So blitter can be activated.
Altram works.
Altrom however seems to bomb out when the blitter is activated.
Maybe this is always the case even on your STE?

Hi Badwolf , Thanks for all the Github projects! Already had the PCB for the DSTB-1 laying around for a longer time as I now own the Phoenix board I had no excuses any more for not building it (and the youtube guide is very helpful). A 68000 booster with Altram is in my mind the correct upgrade for ...