Just an idea which I have brought to life as the other way is a that piece of a metal floppy caddy

OK, it came up that A1000 works fine only with SanDisk CF 8GB card 2020-11-06 19.19.11.jpg 2020-11-06 19.19.19.jpg No clue why but it may be needs more power as TF sits on top of KuickStart II board. Probably that setup will need CF adapter which has external power source like that one: https://www....

Yeah - I did run it as the admin other way it says Access Denied. Simple I'm not sure if WinUAE should to recognize more info or it is fine. Other options which are available: - IDE (auto) with ATA-1/ATA-2+/ATA-2-strict - UAE (uahef.device) which I think is related to "soft" HDD Disk info gave by Wi...

Well - as I have right now better access to real Amiga hardware with CF card I just dusted off my old A1200 HDD to see if I can recover anything from it. To get it done I have installed WinUAE running on Win7 and connected that HDD via ATA2USB cable. Windows recognized connected HDD (at least size o...

PaulJ_2.0 wrote: ↑

Thu Oct 29, 2020 2:32 pm

This could be a PSU problem, the TF card could well be tipping yours over the edge.

How can I verify that?

Yes - I have tried to re-insert CF card, no luck. Also there is no LED indicator when booted with CF card connected to the board so my first thought was about not enough power is getting to the CF reader so it may need to required some wiring from the board to have it up and running. As I wrote befo...

I just got TF536 card with intention to put into A1000 but I'm not able to boot it with CF card connected to it. A1000 will stay in the black screen. When I will disconnect and boot from the gotek, or just leave no "floppy" inserted, it will boot fine to the Workbench or Kickstart screen. TF536 is o...

Based on that article below it looks like I will not work at all to have more than 2 extensions in the CPU socket :\ In this case I'm leaning towards putting TF53x in A1000 as it will may kill two birds with one stone (more RAM and more power ;)) 122072216_10224867377057946_3314282139649647371_n.jpg

Yes - it was working fine on A500. Maybe I should to use CPU from A1000 but I will expect there is no difference. Also I have pulled out Insider II and put AdSpeed directly on KuickStart II board with default KS 1.3 instead 2.04 and I was able to boot Amiga in 7Mhz as well 14MHz but Workbench didn't...

I have tied to transplant ICD AdSpeed from my A500 to A1000 (ROM 2.04) but it will boot only with it set to 14MHz but from there I can't load WB (via Gotek). It will error out with the message: RAM Program Failed (error #80000003) Wait for disk activity to finish. CPU is installed on the DKB Indside...