Search found 601 matches
- Thu Apr 11, 2024 6:34 pm
- Forum: MEMBER BLOGS
- Topic: Raven. A homemade Atari-like computer
- Replies: 50
- Views: 4137
Re: Raven. A homemade Atari-like computer
@agranlund ... is there a TSENG ET4000AX ISA graphiccard in the first ISA slot? Use you the Atari Nova driver or NVDI ET4000 for it?
- Mon Mar 04, 2024 12:28 pm
- Forum: HARDWARE ISSUES
- Topic: No clock signal to the Shifter
- Replies: 25
- Views: 983
Re: No clock signal to the Shifter
Yes, there is a 74LS11 for the 2 chip Eprom config ...rubber_jonnie wrote: ↑Mon Mar 04, 2024 11:18 am It looks to be the same REV as the OP, so there may well be jumpers/pads on this variant to allow 2 ROM sets.
- Mon Mar 04, 2024 11:08 am
- Forum: HARDWARE ISSUES
- Topic: No clock signal to the Shifter
- Replies: 25
- Views: 983
Re: No clock signal to the Shifter
No but boot up with a white screen this is because no 6 chip TOS is installed. I think because of the white screen the clock on the shifter is ok ...rubber_jonnie wrote: ↑Mon Mar 04, 2024 10:40 am But would that affect the oscillator circuit? Surely that just requires power to provide the clock signals and nothing from the OS?
- Mon Mar 04, 2024 10:26 am
- Forum: HARDWARE ISSUES
- Topic: No clock signal to the Shifter
- Replies: 25
- Views: 983
Re: No clock signal to the Shifter
All STM mainboards are for 6 chip TOS only isn't it ...
- Thu Feb 22, 2024 12:01 pm
- Forum: HARDWARE ISSUES
- Topic: MegaSTE repair
- Replies: 66
- Views: 21227
Re: MegaSTE repair
I had installed gold-plated Atari PLCC sockets from BEST ...
- Thu Feb 08, 2024 5:00 pm
- Forum: EXXOS WEBSTORE INFORMATION
- Topic: 1.44MB Mega STE floppy drive
- Replies: 3
- Views: 279
Re: 1.44MB Mega STE floppy drive
Atari MegaSTE, Atari TT and Atari Falcon can handle normal PC Floppy drives. You must set der Floppy to DriveSelect 0 and you have to put in a Atari AJAX Floppy Controller Chip in. The DIP switch 7 set to ON select the HD Mode ...
- Fri Jan 12, 2024 4:59 pm
- Forum: HARD DRIVES
- Topic: Mega ST Hard drive mount
- Replies: 13
- Views: 3664
Re: Mega ST Hard drive mount
I still had an ICD box from a micro adapter and this sheet metal was included I think. No idea how it fit ?
- Wed Jan 10, 2024 7:14 am
- Forum: HARD DRIVES
- Topic: Mega ST Hard drive mount
- Replies: 13
- Views: 3664
Re: Mega ST Hard drive mount
Back then, Hard&Soft also had a set for the Atari Mega ST including a sheet metal plate including spacer bolts. There are numerous mounting holes in the manboard, for example for a graphics card. The 3.5 Zoll SCSI hard drive was rotated 90 degrees next to the floppy in the front left area of the...
- Fri Dec 15, 2023 7:36 pm
- Forum: MEMBER BLOGS
- Topic: OJ’s projects…usually breaking stuff.
- Replies: 13
- Views: 16997
Re: OJ’s projects…usually breaking stuff.
Take a closer look at the soldering of the ET4000AX chip and may be resolder it with a lot of good flux. I also had a defective card where the bus driver chips were defective. For the data bus 74LS245 chips and for the address bus faster 74F244 chips may be swap these out?
- Fri Dec 15, 2023 5:50 pm
- Forum: MEMBER BLOGS
- Topic: OJ’s projects…usually breaking stuff.
- Replies: 13
- Views: 16997
Re: OJ’s projects…usually breaking stuff.
How much ET4000 ISA cards do you have for testing ?