Without sounding stupid, is it possible to buy a TF1260 with or without cpu?
I have a spare Rev 5 060 that I’ve been holding onto with hopes that that the tf1260 would be released.
Search found 7 matches
- Fri Mar 05, 2021 6:55 am
- Forum: TF360
- Topic: TF1260 stuff
- Replies: 370
- Views: 142426
- Wed May 16, 2018 2:03 pm
- Forum: HARDWARE ISSUES
- Topic: 1040STe locks up or bombs out after warming up
- Replies: 11
- Views: 6762
- Wed May 16, 2018 1:21 am
- Forum: HARDWARE ISSUES
- Topic: 1040STe locks up or bombs out after warming up
- Replies: 11
- Views: 6762
Re: 1040STe locks up or bombs out after warming up
Couple pics of the area around the cpu and blitter.
- Tue May 15, 2018 4:20 pm
- Forum: HARDWARE ISSUES
- Topic: 1040STe locks up or bombs out after warming up
- Replies: 11
- Views: 6762
Re: 1040STe locks up or bombs out after warming up
I would suggest trying the HC type CPU and see if that helps.. As troed said also, you may need to change the SIL resistors.. what values are on the address and databus on your machine ? (they are located around the CPU & blitter ). All the red ones like on this image.. https://www.exxosforum.c...
- Tue May 15, 2018 4:10 pm
- Forum: HARDWARE ISSUES
- Topic: 1040STe locks up or bombs out after warming up
- Replies: 11
- Views: 6762
Re: 1040STe locks up or bombs out after warming up
Took the plastic case top off my STe, removed the RF shield and left the keyboard outside the case for maximum ventilation. Airconditioning was running and the ambient room temp was about 74f/23c. Ran a few demos and didn't see any crashing. Ran YAART overnight. Completed 48 passes with zero errors ...
- Mon May 14, 2018 11:50 am
- Forum: HARDWARE ISSUES
- Topic: 1040STe locks up or bombs out after warming up
- Replies: 11
- Views: 6762
Re: 1040STe locks up or bombs out after warming up
You need to recap your PSU.. pico's a lot of them are worse than a failing Atari PSU. Definitely do the above first. Or try a different genuine Atari PSU if you have one available. As exxos says, Picos are not ideal. Also, have you tried a different set of SIMMS? or Cleaned the contacts on the SIMM...
- Mon May 14, 2018 12:03 am
- Forum: HARDWARE ISSUES
- Topic: 1040STe locks up or bombs out after warming up
- Replies: 11
- Views: 6762
1040STe locks up or bombs out after warming up
Hi Folks! I'm having some troubles with my 1040STe. I picked this machine up a couple years ago from the UK. I replaced the PSU with a 110v psu so I wouldn't have to use a step up transformer to power it. Problem is this: Once first powered on everything generally works fine. After about 15 to 25 mi...