It was a bad solder joint on the board side int2 pin.
I think I was excited when I was finishing putting it together and botched it.
works great.

Thanks for the answer!

so After replacing the rom with a 3.1 it is working, but i am having issues with the ide. i have tried re-flashing different versions of the tf530 firmware, i have tried an hdd as well as a cf adapter with cf card. With the diagrom in and any combination it will freeze when doing a hdd check. I have...

I got the diagrom and everything tested good, so i put my cloanto 3.x rom back in and same thing gray screen.
so I said ah whatever lets try the original rom, and it booted.
does the tf530 not support the 3.x rom? because i was able to startup wb with no issues.

Yep that is it, I found a posting on ebay for the diagrom and I will grab that to figure out what is going on.

hopefully it will only be a few days.

I appreciate all the help And thanks for making such awesome boards!

yep I see, but what i am saying is I have nothing, above Assign new config file.
Only time i get all the options like your top picture is after disconnecting the cable from the menu.

I think i am explaining things wrong and that makes sense as I don't know any of this very well. So Starting from opening ise impact, I create a new project, then click configure devices using boundary-scan automatically connect cable, next it asks if i want to assign config files, at that point i s...

Terriblefire, the items I got when right clicking were " assign new config file, set programming properties, set erase properties, and launch file assignment wizard" there were no programming options, EzdineG was right it did work with that method I was able to erase, blank check, and prog...

Hi Guys, I got my board soldered up on Monday and got my programmer last night and I cannot program the cpld's for the life of me. When I do a auto scan the chips are detected, and i can add the jed bus and memory files but afterwards I cant do anything with the chips, right clicking gives me no opt...