portmap TCP 356 192.168.1.61 356 does the trick
AExplorer is working now, everything is fine
Thanks for the advice
Search found 15 matches
- Thu Jul 16, 2020 8:39 am
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
- Tue Jul 14, 2020 1:24 pm
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
Definitely have to set up that port to forward within the ESP config, yep! Once that is done, configure AExplorer on the PC to configure to whatever IP you have given the ESP module, in my case it is 10.0.0.229 (and not 192.168.240.2 as TerribleFire said) On the Pc i already set AExplorer to ESP mo...
- Tue Jul 14, 2020 9:03 am
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
Any chance to get Amiga Explorer working with the ESP ? I tried to ping the ESP DHCP local adress 192.168.1.62 with a Windows PC and no answer But the CD32 can ping all my local network adress Are the network incoming connexions routed by the ESP too ? Do i need to add NAT to access the CD32 on port...
- Mon Jul 13, 2020 9:16 pm
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
I've finally sorted what was wrong. The 2 ESP that i've ordered was bad. I'm not very lucky :? So i've ordered different ones .They have a red LED plus the blue led Flashing them doesn't give the blue led staying on when powered, but THEY WORKS !!! First flash and BOOM! It works :D Red led stays on ...
- Fri Jul 10, 2020 10:18 pm
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
You should be able to ping 192.168.240.1 192.168.240.2 is the address of the Amiga itself. Figure out what your LAN IP is and you can telnet into it from that side... e.g. from putty you can telnet (not ssh... chose the right option) to it on port 7777 if you know the IP address and check its ok. S...
- Fri Jul 10, 2020 8:21 am
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
Simple question : without the ESP plugged in, should i be able to ping 192.168.240.2 if TCP stack and script are installed correctly ?
It was working yesterday but now the esp is blinking continuously when power up and network doesn't work anymore....it gives me a headache
It was working yesterday but now the esp is blinking continuously when power up and network doesn't work anymore....it gives me a headache
- Thu Jul 09, 2020 12:18 pm
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
Finally it worked .
It was just caused by a bad header soldering, my ESP-01 flash was good
Hard to detect because the led was on altough there was a bad solder on a pin and already resoldered twice....
It was just caused by a bad header soldering, my ESP-01 flash was good
Hard to detect because the led was on altough there was a bad solder on a pin and already resoldered twice....
- Fri Jul 03, 2020 6:50 pm
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
Hi rochabian, Hi supaduper :) , you should replay my video tutorial , if you done same I do "live" , you should be able to connect with telnet, did you have all answer "set" after putting you ssid and password ? , careful to have ssid without uppercase ! , I had issues like this...
- Fri Jul 03, 2020 2:56 pm
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
slip.device is in devs: network folder slip is present in devs:netinterfaces Baud rate is edited on slip0config to match 115200 I've tested on a fresh ClassicWb install too, with 2 different programmers & 2 different ESP How can i be sure the ESP is recognized, excepts the blue led on ? Perhaps ...
- Fri Jul 03, 2020 1:46 pm
- Forum: Terriblefire's channel
- Topic: Getting WFI Working on TF3xx with ESP Module
- Replies: 221
- Views: 122466
Re: Getting WFI Working on TF3xx with ESP Module
Sorry, it was a typo on the post, i've entered 192.168.240.1,7777 but it doesn't work
What do you mean with "Have you got a TCP stack running..."
I've installed Roadshow, but can't ping 192.168.240.1
What do you mean with "Have you got a TCP stack running..."
I've installed Roadshow, but can't ping 192.168.240.1