PaulJ_2.0 wrote: ↑Sun Feb 28, 2021 1:03 pm
Ah yeah the keyboard touches the bottom pins, I just covered them with tape. It touches but the case closes
You could probably split the raises between the card and the relocator.

Yeah I wussed out and split the raises, didn’t want any enthusiastic keyboarding causing a short

Nice, I couldn’t quite get the clearance between the keyboard and relocator this way but that looks like a really neat install

Nice! Looking at that pic it, so you think it would also work soldering the pins on the pi directly to the denise adaptor? Either above or below? I took a look - I don't think the the Pi would clear the passives on the main board (there's a logic chip too) if mounted on the underside of the denise ...

With the TF536 sitting so high, can the keyboard be fitted and case shut on the A500? Yup. After “must work” that was my second requirement. :D I had to split the pin headers lifting the relocator and 536 (so both are lifted equally by one ‘layer’ rather than lifting the relocator with two strips) ...

Nice! Looking at that pic it, so you think it would also work soldering the pins on the pi directly to the denise adaptor? Either above or below? I bought my adapter from fleabay - it is a v1 and came with male headers. I ended up not using any headers on the Pi and just soldered it to the adapter’...

Hi all, Thought I'd report success with c0pperdragon's Denise adapter and hoglet67's RGBtoHDMI mod in combination with the TF536 on a CPU relocator :D I lifted the relocator and the TF using a set of machine pin headers on each, and gently angled the pin headers on the denise adapter so the Pi Zero'...

If it helps, I popped this onto my A500's 536 and all is still good there. Turrican II still sounds good, Damocles is still synced up. I'll try a few others but looks good to me.

Can't comment on A2000 sadly!

Sound issues are no longer present on an A500+ and a ... CDTV. Great stuff! The new firmware also appears to have reduced the boot time of a SD card WB3.9 FFS image significantly compared to the previous firmware that I was using... :o Perhaps I'm behind the curve and have missed a previous update?...

So with this firmware... Turrican 2 dodgy ADF written to floppy - perfect :) Turrican 2 WHDLoad slave 1.8 - perfect :) Turrican 2 WHDLoad slave 2.1 - perfect :) . . . Damocles text timing (WHDload slave 1.3) - perfect! :D It's a winner! I'm not quite sure what to say other than cracking job TF! And ...

Yeah that’s the same whdload issue I linked earlier in the thread. I thought it might be that initially but it’s fine on the 534 - and go0se reports it’s fine on the 330 too. Aaand - the issue is also present when running from floppy which rules out Whdload - although the latest slaves (2+) have def...