Search found 6 matches

by MasterOfGizmo
Mon Oct 14, 2019 10:13 am
Forum: MONGREL EDITION DEVELOPMENT & INFO
Topic: 3V <> 5 V thoughts
Replies: 1
Views: 1030

Re: 3V <> 5 V thoughts

exxos wrote:
Sat Mar 23, 2019 8:26 pm
I was half thinking if the CPU bus pullups were on 3.3V rail then the CPU would actually still run on 5V, but all the IO's would be on 3.3V.
You'd still have 5V on the bus whenever the 5V CPU drives it. The 3.3V pullups would only pull it to 3.3V when no 5V part is driving against them.
by MasterOfGizmo
Mon Oct 14, 2019 7:44 am
Forum: ALPHA DEVELOPMENT INFO
Topic: STFM Keyboard Remake
Replies: 35
Views: 5100

Re: STFM Keyboard Remake

keli wrote:
Mon Jul 22, 2019 5:39 pm
How are you going to do the controller?
The IKBD has been implemented in HDL and a small FPGA or a big CPLD could be used to get 100% compatibility without the need to source HD6301's. See https://github.com/harbaum/ikbd.
by MasterOfGizmo
Thu Oct 10, 2019 4:29 pm
Forum: HARDWARE DISCUSSIONS
Topic: Suska board
Replies: 41
Views: 10854

Re: Suska board

I'd assume that a low level dump of the suska SD card can be mounted in hatari and you could then just copy files from the host fs or a floppy image to it within hatari. You can even do things like byte swap on the image in between if necessay or modify the partition table or just extract a single p...
by MasterOfGizmo
Tue Oct 08, 2019 1:03 pm
Forum: ALPHA DEVELOPMENT INFO
Topic: Cycle exact FPGA recreation
Replies: 13
Views: 2043

Re: Cycle exact FPGA recreation

exxos wrote:
Tue Oct 08, 2019 12:54 pm
as we do not want to start recreating the MiST / suska as obviously that already exists :)
And you'd end up with many people playing SNES games on a device that looks like an ST :lol: ... The MiST started as an ST as well and now look where it went.
by MasterOfGizmo
Tue Oct 08, 2019 12:50 pm
Forum: ALPHA DEVELOPMENT INFO
Topic: Cycle exact FPGA recreation
Replies: 13
Views: 2043

Re: Cycle exact FPGA recreation

I actually think there's something in between the MiST and your board. That's a board that fits into the original ST case, has all the connectors a real ST had and is otherwise made of one or more FPGAs. The functionality would be the same as your device but you wouldn't have to rely on slaughtered ...
by MasterOfGizmo
Tue Oct 08, 2019 12:44 pm
Forum: MONGREL EDITION DEVELOPMENT & INFO
Topic: MONO SWITCH
Replies: 5
Views: 1066

Re: MONO SWITCH

Many, MANY years ago i did something very similar on a real ST. See my old (german, google will help you) page at http://www.harbaum.org/till/atari/multisync.html This also includes links to schematics. This does: * combine mono and color video signals into one rgb signal * use a GAL to detect the v...

Go to advanced search