Nice, thanks for all your work.

Is there a reason the bom doesn't have the RNs on the bottom side?

supaduper wrote: ↑Sat Sep 19, 2020 3:36 pm Just comment the DF0: out in the Startup-Sequence no need to make another CF

That worked. It now boots and I can use it just like my a1200.

Now I need to get it to boot directly into x-bench and be controllable with a joystick.

Thanks.

But what I mean was I need to copy this cf card and get it working on a new one.

Well loook at that! That's all I needed was the jumper. Thanks!

Guess I need to build a proper image for the cd32 since it's looking for a floppy.

What's the jumper for by the ide header? I can't read the silscreen on mine. What type of image shold I write to the cf card? I mean, what version of the OS? I had a card from my 1200 that I tried, and it just gave me blank screen. It's WB 3.1 Without a CF card, it does show the cd32 disc logo. Is ...

maybe, but I even put tf330 in the customer reference field on the mouser order....

great thanks.

Driving me nuts what I bought 10k for then....

Ok, it was ages ago when I bought the parts to build my 330, so I apologize. But for some reason I have 4 resistors for r4 & r5. 2 of 1K, and 2 of 10k.

Is there a reason why we might want to use 10k instead of 1K? Is that why I bought both?

I hate getting old and forgetting things.

I think it depends on the model of Pi used. @terriblefire didn’t even specify the GPIOS on the wiki for that very reason. But it would be great if that information could go back on github, or here. Or wherever :) That's a good point. My pi is a v1, so those pins are definitely not the same on a 2 o...

Answering my own question here, but I think it's this for Pi Ver 1:
Pin 7 (GPIO4) -> TMS
Pin 15 (GPIO22) -> TDI
Pin 13 (GPIO27) -> TDO
Pin 11 (GPIO17) -> TCK
Pin 1 -> 3.3v

And the command is:
sudo xc3sprog -v -c sysfsgpio_creator -p 0 <insert filename here>.jed:w