Search found 17 matches
- Wed Feb 02, 2022 12:43 pm
- Forum: TF530
- Topic: Cpu relocator problems
- Replies: 3
- Views: 1740
Re: Cpu relocator problems
I give up with this relocator, I have had problems for a while and was thinking it was my add-ons, but I now find everything works in the CPU socket, I will use anything dodgy via a separate socket in future to avoid damaging anything, they are not wire wrap pins on the dodgy add-on but are still a ...
- Wed Feb 02, 2022 9:52 am
- Forum: TF530
- Topic: Cpu relocator problems
- Replies: 3
- Views: 1740
Re: Cpu relocator problems
I ordered a new relocator board, I think some pads must be broken from inserting a product I bought which had the wrong size pins
- Tue Feb 01, 2022 6:05 pm
- Forum: TF530
- Topic: Cpu relocator problems
- Replies: 3
- Views: 1740
Cpu relocator problems
Recently I have bee struggling with the CPU relocator in my Amiga 500, my tf530 works fine without it but dark grey screen with it plugged in, I resoldered all the pins and tested the resistances and all pins are good, I am at a loss, any ideas ?
- Sat Dec 11, 2021 10:02 am
- Forum: TF534 (OBSOLETE)
- Topic: Fonzies build
- Replies: 7
- Views: 4077
Re: Fonzies build
I think with ic's you really need to use a mask but the time it would take you could probably hand solder quicker
- Sat Dec 11, 2021 9:20 am
- Forum: TF534 (OBSOLETE)
- Topic: Fonzies build
- Replies: 7
- Views: 4077
Re: Fonzies build
I think for passive components paste is better but chips ? I am not decided as I am bad either way
- Sat Dec 11, 2021 8:42 am
- Forum: TF534 (OBSOLETE)
- Topic: Fonzies build
- Replies: 7
- Views: 4077
Re: Fonzies build
I am still trying to get this board to work over a year later, soldering the memory chips with paste did not go well, some solder ended up under one of the chips, I lost a track under the memory chip and think I repaired it ok, I was suspicious about my ebay xtal but now I have an oscilloscope I can...
- Wed Sep 16, 2020 8:24 am
- Forum: TF534 (OBSOLETE)
- Topic: Fonzies build
- Replies: 7
- Views: 4077
Re: Fonzies build
I soldered on my nice cpu socket I got from the exxos store then realised it was very close to the memory chips 🤔 Not a problem if using a soldering iron but I was going to use solder paste and hot air Kapton tape is arriving today and the only other thing to solder is the 68000 pins so I will hopef...
- Wed Sep 09, 2020 12:16 pm
- Forum: TF534 (OBSOLETE)
- Topic: Fonzies build
- Replies: 7
- Views: 4077
Fonzies build
Would like to share my progress so far.
A bit rough, it is my first build but looks working
A bit rough, it is my first build but looks working
- Sat Jun 27, 2020 9:07 pm
- Forum: TF534 (OBSOLETE)
- Topic: TF534 /w030@50+FPU runs @14Mhz and I get no RAM
- Replies: 10
- Views: 6809
Re: TF534 /w030@50+FPU runs @14Mhz and I get no RAM
A quote from TF the man himself...
I'm not sure 1.3 suports zorro III. So it probably will never work in 1.3. The only OS i claimed it will work with is 3.1.
I'm not sure 1.3 suports zorro III. So it probably will never work in 1.3. The only OS i claimed it will work with is 3.1.
- Fri Jun 19, 2020 6:39 pm
- Forum: Terriblefire's channel
- Topic: ReAgnus Board (Design Complete)
- Replies: 65
- Views: 58219
Re: ReAgnus Board (Design Complete)
You sir are definitely on fire ! Someone tell me why I need 2mb of chip ram on my A500 ? I know I want it but I`m not sure why