I have joined the testing club and have built my three IDE adapters. :D The TOS ROM I have programmed has TOS 1.04 (IDE patched) and EmuTOS 0.9.12(256k) in the IDE adapter plcc44 socket. EmuTOS is booting fine and everything is working in my H4 board. However TOS 1.04 (IDE patched using https://gith...

Welcome Dan

Good to hear from another local Queenslander.

What about Knife ST (HiSoft)?

I should correct this as my typing missed the words “I will” from above and so I will have 3 on the way as I plan on ordering some once they are available although the update on the other thread may mean I will be waiting a while.

So one of these would also do the trick: viewtopic.php?f=73&t=1640&start=450#p33287

I like how you got the wire under the dma board. Were did your source the colour header and does anyone now I the 26 pin header has ground and plus 5 on the high pin numbers Tom I used single-row header pins to do these. The yellow ones came with some STM32 boards I bought, and the blue ones, I pur...

exxos and Icky Just wondering with the H4, could I use the EmuTOS 256k image to boot? So far I have been using the 192k EmuTOS image. As the 256k version has more functionality than the 192k version, i was wondering if the H4 would work or is there the same limitation as original STF/FMs in decodin...

The 1.44 GAL shouldn't affect anything. Though I can't say for gotek as I never used , or own one. I would try with a proper floppy drive.. I assume you did this though ? https://www.exxoshost.co.uk/forum/viewtopic.php?f=78&t=2335&p=31893#p31893 EDIT: Has anyone else tried gotec with the GAL and ha...

I have also tested the FlashFloppy File Selector and can confirm that it does not work for me either with the HD modification active. It would not even attempt to recognise the AUTOBOOT.HFE file until I had the Pin 2 setting in FF.CFG With the Pin 2 setting, it attempts to load the AUTOBOOT File Sel...

Don't know what ya mean. If I have 100 disk images on the stick they don't show up with a number until I specify a file and assign it to a slot. They just don't show up because their on the stick. ... My bad. You need a setting in FF>CFG: Indexed mode This mode is configured via FF.CFG: nav-mode = ...