Search found 3502 matches

by exxos
Thu May 10, 2018 9:44 pm
Forum: HARDWARE ISSUES
Topic: Write protect on floppy ?!
Replies: 6
Views: 631

Re: Write protect on floppy ?!

So after much investigation.. It seems a 45R resistor in series with RDY pin seems to solve the problems.. This is the R303 side... r452.png and after the 45R (on DMA pin 38) r45.png Now the only difference seems to be less undershoot (but this is random anyway), BUT, like other problems I've seen w...
by exxos
Thu May 10, 2018 9:37 pm
Forum: HARDWARE ISSUES
Topic: Write protect on floppy ?!
Replies: 6
Views: 631

Re: Write protect on floppy ?!

kodak80 wrote:
Thu May 10, 2018 9:34 pm
Would it be worth trying a HC processor to see if it behaves differently?
It has one :) But behaves the same with the original..
by exxos
Thu May 10, 2018 8:02 pm
Forum: HARDWARE ISSUES
Topic: Write protect on floppy ?!
Replies: 6
Views: 631

Write protect on floppy ?!

When I try and write to the floppy, TOS says its write protected, but its not.. I've checked pin 25 of the WS1772, and it is high all the time as expected.. but what else can cause TOS to behave like that ?! I am using a STE, TOS206.. I had a guy having similar issues a few months ago, I am not sure...
by exxos
Thu May 10, 2018 6:08 pm
Forum: CHAT FORUM
Topic: USB Audio Interface
Replies: 13
Views: 1093

Re: USB Audio Interface

Well, rule 1 is never connect equipment together with the power on.. That's how I fried my Falcon :(.. As a floating earth will come into contact with a gnd ref earth and you end up with a voltage spike which kills stuff. Once all the gnds connected, things are generally happy. If you use good solid...
by exxos
Wed May 09, 2018 10:00 pm
Forum: CHAT FORUM
Topic: CD graphics can anyone do one ?
Replies: 19
Views: 1078

Re: CD graphics can anyone do one ?

IngoQ wrote:
Wed May 09, 2018 2:31 pm
Tapes are quite cheap, you can order them pre printed in small enough batches. But I'd be happy with a single tape, hand signed by the artist :-P
Might add 1p more value signed!
by exxos
Tue May 08, 2018 7:09 pm
Forum: STE V1 32MHz BOOSTER
Topic: STE V1.5 32MHz BOOSTER - STATUS
Replies: 238
Views: 13580

Re: STE V1.5 32MHz BOOSTER - STATUS

I bought a few 1.27mm headers but I must confess that they fit just as "badly" IMHO with or without the dummy CPU. Of course, I don't really know what a "good fit" should be like ... maybe I should just send you a dummy? :) When you insert the pins, the socket tabs get pushed out a fraction.. the s...
by exxos
Mon May 07, 2018 4:40 pm
Forum: ROM UPGRADES
Topic: Strange TOS 1.04 Issue
Replies: 6
Views: 447

Re: Strange TOS 1.04 Issue

The files are correct.. I would check you have not got a bent pin, as it can happen easily without noticing.. Also clean the pins on the chips with IPA. Is possible the PSU could be failing so if you can power the board from a benchtop PSU and it will help to rule that out.. Speed and brand of ROM c...
by exxos
Mon May 07, 2018 4:15 pm
Forum: ROM UPGRADES
Topic: Strange TOS 1.04 Issue
Replies: 6
Views: 447

Re: Strange TOS 1.04 Issue

Can you post the ROM files you are trying and I will take a look at them..
by exxos
Mon May 07, 2018 2:35 pm
Forum: HARDWARE ISSUES
Topic: new PSUs in my Falcon causes video output to fail
Replies: 22
Views: 1603

Re: new PSUs in my Falcon causes video output to fail

I would add the resistors on the clock patch is the only thing I can think of currently.
by exxos
Mon May 07, 2018 12:11 pm
Forum: CHAT FORUM
Topic: Look what I googled today
Replies: 1
Views: 301

Re: Look what I googled today

Strange how really old tech tends to fail over time. Sure, some things last longer than others, also depends on "user abuse" and other factors. usual let's blame head of corp rather than self.