Thanks for the replies guys, I think I've resolved the issue. I retested the board under diagrom and to my surprise the fastram was no longer being detected, even though it had been detected and passed test after the initial build. I re-flowed the ram again and gave the whole board an additional cle...

Hi All, Received my TF330 boards yesterday, Cheers TF! I've built two of them and they seem to go together really nicely. The pads on the board seem somehow more forgiving than the 534 and the RAM is a pleasure to work with! Both boards appeared to work correctly straight away, pass diagrom mem test...

Cheers guys, and apologies SupaDuper, I was looking at the old version, the Rev2 (i.e. Rev3) version that you posted can be found here for anyone else that is looking:

viewtopic.php?f=70&t=1545&start=10#p16993

Thanks.

Can anyone help me out with the correct value for 0603 C11 on the 330 Rev 3? It seem to be missing from the SupaDupers BOM at:

viewtopic.php?f=70&t=1374&start=260#p16089

Cheers.

Edit, this is the rev2 versions which can also be used for the rev 3 as kindly supplied and pointed out by supaduper https://www.exxoshost.co.uk/forum/viewtopic.php?f=70&t=1545&start=10#p16993 Firmware is here: https://github.com/terriblefire/terriblefire-binaries I'd like one. :) Is there a BOM an...

This really is gold! Decided to attack my non booting 534, logically starting with the connections to/from X1 and within 5 mins I've located an invisible short between pins 2 and 3 of trigger buffer IC4 that didn't show up with the scope. A quick re-flow later and it's booting to Diagrom serial only...

Excellent, this really will be a massive help. Can said batch file be used to produce versions for the 530 and 330 or am I just being greedy now?

Fantastic! I was just thinking the other day how an amigapcb.org type solution for the 534 would make my life a lot easier and along comes pretty much exactly what I wanted!

Cheers for putting this together TF, Is there much work involved in (I assume?) deriving this layout from the Eagle files?

Hi Kludge, I don't want to further muddy the waters on your thread as it's likely that everyone's problems have subtly different symptoms and causes , however here's my plan of attack for dealing with similar issues that I'm currently having: 1. Check all soldering looks good under the scope & all I...

Great stuff, payment sent, thanks.