Made some more progress:


Missing one 1206 0.1uF capacitor on the underside and I have to wait for the PGA128 socket.

Done some more soldering, memory, transceiver chip and schmitt-trigger buffers soldered on. I've also soldered the SPI flash chip on the board, I know it isn't used by now, but it's nice to have it already on the board.

I've started the build:


Both CPLD's soldered on + 3.3 volt regulator

First signs of life, both CPLD's are found:

Oh yes. No problem, I will share them here. Here they are: Partnr. Digi-Key: Number: Unitprice Total Cost: Description: 732-7565-1-ND 16 0,54100 € 8,65 CAP CER 10UF 10V X7R 1206 732-7989-1-ND 15 0,04200 € 0,63 CAP CER 0.1UF 25V X7R 0603 LM1117MPX-3.3/NOPBCT-ND 1 1,00000 € 1,00 IC REG LIN 3.3V 800MA ...

As I've received my TF534 PCB's and already ordered all of the needed components in one go, I think it's a nice idea to put my progress here too. Little picture of the PCB: fgpXHER.jpg Now waiting for all the stuff to arrive. I've ordered most stuff from Digikey, so that will arrive soon. PGA socket...

My TF534 boards have arrived, yeehaw! Now, get some components and solder one up.

I had the same problem with my TF530, it wouldn’t boot. No clock signal. Turned out to be a short on the BUS CPLD. I reflowed it and my Amiga booted with the TF530 at 50 mhz.

Yeah, very small world indeed.

I’m interested in 2 PCB’s,

Welcome here! I think we might know each other from Retrozone. I am the one with the modified A500 with TF530. Nice to meet each other here too.