terriblefire wrote: ↑Sun Jul 05, 2020 9:42 am

8 Bit Dreams wrote: ↑Sun Jul 05, 2020 8:33 am yeah, i can reproduse this,
don't know, is it a bug or a feature,
DH0 is slow while DH1 is always 6,5MB/s or above...

Is that an actual thing or is it a Sysinfo thing?

This happens on a "real" IDE bus too, so this is a thing and not a bug on the TF-cards.

Yeah, received mine and soldered it yesterday.
Top notch!

theq wrote: ↑Mon Apr 20, 2020 3:25 pm Build a serial dongle to test it. Same dongle DiagROM uses.

Do this.
Desciption you can find in the serial test menu in AmigaTestKit - F8: Serial/Parallel Test - F3: Dongle Build Guide

kulamario wrote: ↑Mon Apr 20, 2020 3:40 pm I check this on putty I have something
And amiga test kit show like is something wrong I think 20200420_154035.jpg

You have made a dongle with the required bridges?

kulamario wrote: ↑Mon Apr 20, 2020 3:19 pm Next what I think maybe burn diagrom and check serial port in amiga ?
I hope is not broken

You can download and use AmigaTestKit, and build a serial dongle to test it. Same dongle DiagROM uses.

Try telnet to 192.168.1.2 7777 (the IP it has gotten pr photo)

To clearify: 192.168.240.1 is only accessible from the serial side of the ESP.

Just power off and on the ESP after reset. Should make it work.

@matt020 Did you program the ESP in DOUT-mode and verified that it successfully uploaded the firmware?

My lab doesnt home school my child or do my job for me unfortunately. Or fix my dishwasher, car or the 100 other things that seem to have broken around here in the last month. Fixing the dishwasher should be priority number 1 (obviously schooling is important too!) The most important thing I've lea...

There is no testing happening. The whole thing is over until Coronavirus is gone. I'm not even going into my lab at the moment. Sad news. Was hoping for new toys to keep sane. Sounds like I have to keep doing my daily jogging runs :roll: The TF536 will keep me busy for a while 8-) IPA kills the cor...