Search found 19 matches
- Thu Aug 24, 2017 11:21 am
- Forum: HARDWARE ISSUES
- Topic: Floppy header pinout - loose pin
- Replies: 25
- Views: 15774
Re: Floppy header pinout - loose pin
what is 'bead 224' ? is it something soldered to the board? can you point it out on the pics I posted ?
- Wed Aug 23, 2017 11:03 pm
- Forum: HARDWARE ISSUES
- Topic: Floppy header pinout - loose pin
- Replies: 25
- Views: 15774
Re: Floppy header pinout - loose pin
so there should be continuity between that pin and pin 20 of the WD ?
also, i'm not sure what a ferrite bead looks like, or rather, what it looks like on an ST board
also, i'm not sure what a ferrite bead looks like, or rather, what it looks like on an ST board
- Wed Aug 23, 2017 9:37 pm
- Forum: HARDWARE ISSUES
- Topic: Floppy header pinout - loose pin
- Replies: 25
- Views: 15774
Re: Floppy header pinout - loose pin
note: the extra wire on the WD is where i've removed an old HD/DD switcher board.
- Wed Aug 23, 2017 9:36 pm
- Forum: HARDWARE ISSUES
- Topic: Floppy header pinout - loose pin
- Replies: 25
- Views: 15774
Re: Floppy header pinout - loose pin
pics, as promised:
the pin i'm pointing a scalpel at is the loose one in the top view, hopefully it's more obvious which pin it is on the bottom view
the pin i'm pointing a scalpel at is the loose one in the top view, hopefully it's more obvious which pin it is on the bottom view
- Wed Aug 23, 2017 11:36 am
- Forum: HARDWARE ISSUES
- Topic: Floppy header pinout - loose pin
- Replies: 25
- Views: 15774
Re: Floppy header pinout - loose pin
but just to confirm, pin 16 is motor B enable, not motor A (pin 10 seems to be motor A) , so will having it N/C just mean that if I connect a Dribe B, it won't spin up ? if thats the case, i'll leave it as it is, rather than potentially screw it all up even more.
- Wed Aug 23, 2017 10:13 am
- Forum: HARDWARE ISSUES
- Topic: Floppy header pinout - loose pin
- Replies: 25
- Views: 15774
Re: Floppy header pinout - loose pin
bums.
I'll try a careful re-flow from underneath first.
still, the more I solder, hopefully the better I will get
I'll try a careful re-flow from underneath first.
still, the more I solder, hopefully the better I will get
- Wed Aug 23, 2017 8:35 am
- Forum: HARDWARE ISSUES
- Topic: Floppy header pinout - loose pin
- Replies: 25
- Views: 15774
Floppy header pinout - loose pin
Hi Guys, I'm working on one of my FMs and while I was checking it over last night I noticed that on the floppy header I added a few years back, there is a loose pin. it has been pushed through the board a little and on closer investigation, I can push and pull it through the board with tweezers. It ...
- Tue Aug 22, 2017 6:52 pm
- Forum: ALPHA DEVELOPMENT INFO
- Topic: SUGGESTIONS
- Replies: 48
- Views: 47026
Re: SUGGESTIONS
Integrated rtc would be a nice add-on too.
- Tue Aug 22, 2017 5:34 pm
- Forum: INTRODUCE YOURSELF
- Topic: Hello :)
- Replies: 1
- Views: 2150
Hello :)
spiny / Torment here, you may know me from such forums as pouet, demozoo and atari-forum
anyway, joining as I wish to learn more about modding STs, simple as that
anyway, joining as I wish to learn more about modding STs, simple as that