Pondrew wrote: ↑Wed Dec 20, 2023 6:38 pm Thanks supaduper, send me a private message ta with your details

Details sent buddy

Clean the jumper pins just make sure they are making good contact, also clean the CD32 expansion connector with some alcohol as it can oxidize badly if it has not been used in many years and it is common fault.

If still no joy and you are in the UK then you can send the Tf330 to me to test or repair

Man so sad, he was so young, life can be so hard on families sometimes. RIP

Hi guys, bought these x4 full ink sets months ago and the idiots sent the wrong ones , so these are free to any one who has the Epson printers named on the front of the box, UK only as post will be prohibitive anywhere else, so first in gets

If your mate says it is good then give it a try and use `WhichAmiga` program to tell you the revision

bidinou wrote: ↑Wed Dec 06, 2023 8:06 am Thx ! If I understood properly, being a rev1, the XC68060RC50 will get significantly hotter ? (I plan to use it without a fan at 50 MHz cheers !

Should run just fine without a fan, anyway nothing better than the `Finger test ` when you want to know how hot something is running

Yep the E123C and E125C components need removing, this was recommended by commodore itself :) The A600 PSU will be ok so long as it is still working within it`s operational specs , remember these PSUs are now 30 years old and are failing so it must be kept in mind I Still have an hunch that it is th...

Just to add I tested my TF1230 and the ram chips are cool and the CPLD is barely warm and this was stressing it using a demo on loop, so really that cpld could be faulty , it happens, I would send it back to the reseller to test/repair/replace as mentioned by Terriblefire make sure your PSU is good ...

patracy wrote: ↑Tue Oct 31, 2023 12:23 am Thank you everyone for the advice. I loaded MuFastRom and presto 6mb/s!

This is why Exoss is one of the best retro sites there is as we are all here to help each other without the sniping you have on some sites, glad you are sorted fella

Besides installing MUlibsx06080 Also you must use a Mapper like MUfastrom to speed things up, link below

http://aminet.net/package/util/boot/MuFastRom