I built a second test card, the first one already permanently installed in the A1200. I have strange symptoms in my new TF. Due to the lack of parts, I had to sweep 22uf and install 47uf 16V (1206) C29 C54. I installed 1uf 16V (0805) C8 C9 C21 C84 C85 instead of (1206) 1K did not have 0603, installe...

@terriblefire

Which games. We need a little more information. Also try the later beta.

I uploaded him later beta. It's working fine now, thanks

OS32, WHDLOAD 18.5
lure of the temptress, ishar

I soldered to my Amiga rev. 2B TF1230. CPLD144-10ns, RAM MT48LC16M16A2P-6A, Digital bus switch SN74CB3Q3245PWR, i.e. the systems I used in TF536. Programmed CPLD - tf1230r1_2021_09_14_RC1.zip I tested WHDLOAD games Tested by internal IDE 1200 and works fine. I tested EHIDE.DEVICE driver and IDE cont...

I have everything soldered according to https://github.com/agranlund/STRam

Do I have to make a mod for 4MB to work properly?

Is it enough to do as described by @agranlund

@Steve you managed to run 4MB ram from @agranlund. I started the assembly but I can't start it properly

No RF, i.e. ATARI STF, some 520ST.
I have a stable video on them.

ATARI STE, STFM, MEGA have RF and video behaves like in the above video.

https://youtu.be/Jgj9-v65FkE I was working with a video and audio converter from HDMI to SCART / EURO all the time but it got unstable and broke. I switched directly to the DIN13 / SCART cable and now I have that when I connect the ATARI with the modulator, it works like in the movie. Stable without...

like @exxos says IMP chips are just problems. I tested the TOS2.06 board in a Mega rev 2.2 with IMP chips and it failed. First, if you removed the patch blitter, 80% won't run mega. Also, as @exxos IMP DMA mentioned, it is supposed to have a diode connected in series with its power. I solved the pro...

Finally I have started !

I have run out of a 40-pin DIP IC socket, and golpins on jumpers. FOR this I also need goldpins for the keyboard and a power socket. ?

Does anyone have information on good 6PIN sockets