Search found 4967 matches
- Tue Mar 26, 2024 8:03 am
- Forum: Terriblefire's channel
- Topic: TF1260 CPU fan
- Replies: 9
- Views: 581
Re: TF1260 CPU fan
Fancontrol can turn the fan on or off, you have to use values 0 or 1, and that's about it. simple enough...I'll be setting it up as soon as my CPU fan gets installed We tried PWM control but this ended up being more complicated than i wanted. Some fans stalled unless they were moving first etc etc
- Tue Mar 26, 2024 7:59 am
- Forum: Terriblefire's channel
- Topic: timing off running Starstruck Final release demo (2018-04-11)
- Replies: 19
- Views: 962
Re: timing off running Starstruck Final release demo (2018-04-11)
so this demo runs fine timing wise also on a PiStorm32 and the chip ram speeds are slower than my CS-MKIII so no idea why my TF1260 is off with this great demo??? I dont see the issue on any of my 1260s. The only thing i can think of is perhaps more interrupts are generated on the 1260 and the demo...
- Fri Mar 22, 2024 1:38 pm
- Forum: Terriblefire's channel
- Topic: TF1232 Running State of The Art, crashes at 50mhz, runs all day at 25mhz.
- Replies: 8
- Views: 510
Re: TF1232 Running State of The Art, crashes at 50mhz, runs all day at 25mhz.
PLanning to give the Tf1232 fw some love after Revision
- Thu Mar 21, 2024 2:21 pm
- Forum: Terriblefire's channel
- Topic: timing off running Starstruck Final release demo (2018-04-11)
- Replies: 19
- Views: 962
Re: timing off running Starstruck Final release demo (2018-04-11)
i pinged erique about this as he is a TF dev and he did the timing for Starstruck but he's a bit busy with real life right now.
- Thu Mar 21, 2024 7:39 am
- Forum: Terriblefire's channel
- Topic: timing off running Starstruck Final release demo (2018-04-11)
- Replies: 19
- Views: 962
Re: timing off running Starstruck Final release demo (2018-04-11)
I never noticed this myself however i wouldn't make a fw change for this unless it was tied to a specific thing that could be tied down.
TF card is faster at chipram writes than the CS is all i can think of.
TF card is faster at chipram writes than the CS is all i can think of.
- Wed Mar 20, 2024 6:50 pm
- Forum: Terriblefire's channel
- Topic: timing off running Starstruck Final release demo (2018-04-11)
- Replies: 19
- Views: 962
Re: timing off running Starstruck Final release demo (2018-04-11)
@erique Does your TF1260 have timing issues on Starstruck? i've never noticed issues on that demo.
- Sat Mar 16, 2024 6:47 pm
- Forum: TF360
- Topic: TF360 with Kipper2k riser
- Replies: 12
- Views: 503
Re: TF360 with Kipper2k riser
@Amigaz If there is nothing further on this topic i'm inclined to delete it as it incorrectly gives the impression that the regulator should not be on botton of the TF360.
- Fri Mar 15, 2024 12:42 pm
- Forum: TF360
- Topic: TF360 with Kipper2k riser
- Replies: 12
- Views: 503
Re: TF360 with Kipper2k riser
The card doesn't need to be perfectly level. i've mine hanging at about 30 degrees and it's fine. i think you have a different issue
- Fri Mar 15, 2024 12:05 pm
- Forum: TF360
- Topic: TF360 with Kipper2k riser
- Replies: 12
- Views: 503
Re: TF360 with Kipper2k riser
What is the actual issue? if it's not shorting there is no problem.
I put insulation tape on the RF shield on mine. it's better that the 360 is supported anyways.
I put insulation tape on the RF shield on mine. it's better that the 360 is supported anyways.
- Sun Mar 10, 2024 7:36 pm
- Forum: TF360
- Topic: 68060 sources
- Replies: 137
- Views: 83129