I'm trying to flash my tf330 I bought from alenppc using a raspberry pi. But I forget the connections and exact commands. The wiki is now gone from github, which was very helpful, so I'm at a loss as to what the process is.

Does anyone have a guide or a copy of the wiki page they could send me?

What a bummer. I was looking forward to a 1260...

I have 2 tf536 and a tf330 to build, but I don't have the binaries to write. What am I to do? Can someone send them to me?

Subzero79 wrote: ↑Sat Mar 07, 2020 8:27 pm Yes with latest firmware

That's great. This is the latest, right? https://github.com/terriblefire/tf534/t ... ds/tf530r3

And what memory address would the extra 512K be at?

If I have an a500 6a with the tf530 and insert an a501 card, will it actually recognize the memory and RTC?

If it will recognize the memory, how do I test it in diagrom?

I can't seem to find any 68030 sockets. I found one seller on ebay and it's like $12USD for 2. Is that about my only option?

I should also ask about the 68060 sockets at some point since the 1260 and 360 are on the horizon.

The one I bought was from amibay and was supposed to be legit....

I don't have a lot of free time, so I finally found time to look at this again. After retrying solder joints etc and every other suggestion, I decided to put in a 33MHz crystal instead of the 40MHz one. Guess what? It's stable at 33MHz.... So underclocked it works. I don't have a spare 40MHz FPU to ...

All my resistors are 1K BTW. So I happened to have a spare 40MHz cpu. I installed it as well as redoing a few solder joints. I don't see the strange artifacts on the screen anymore, and I'm able to successfully run a fastmem test of all 2mb, but the moment it completes in daigrom and I hit the esc k...

yes. I didn't solder that one.

There isn't one on the topside under the cpu for rev3:
https://github.com/terriblefire/tf530/b ... v3_top.png