G'day!

Which side of the country are you on?

And here I am reading "hires" like its a screen mode....

Check the JTAG wiring to the Pi... Pin JTAG 1 3V3 6 GND 7 TMS 11 TCK 13 TDO 15 TDI In the Pi, issue this command, no need for sudo, just do it as it is... xc3sprog -c matrix_creator -j and you should get a list of the CPLDs information from the TF card. If you don't, you may have a cable problem. If...

Workbench does feel faster to use. Opening folders/drawers in OS 3.2.x in 64 colours is quite zippy now!

Evening update (evening in West Australia, anyway). I think I've sussed out what is going wrong here. I now have a stable system, iteration 4, at 67mhz with a Rev 5 060. I have been using the 6ns RAM jed because I have a 6ns CPLD on the TF1260. However tonight I reflashed using the standard RAM jed,...

So iteration 4 was giving grief after 15-20 mins when overclocked at 67mhz. I went back to iteration 3 as it was last reported to be stable. Well, with some extensive testing, it too is also unstable at 67mhz if left long enough and more than just a demo or game is run. With iteration 3, it locks up...

No worries. What is he verdict on iteration 4? Interation 4 / 68090 1D4 motherboard, 060 Rev 5 3.2 ROM, Workbench 3.2.2.1 Using IDE on A1200 motherboard only No problems, no changes, stable at 67mhz (maybe not, see update) Only got to test for 20 mins or so, played some Quake, did a mass file copy ...

Thank you for confirming.
And thank you Stephen for the update. I know I'm not alone when I say I appreciate and admire your work. Thank you.

Could I please confirm that the serial number for iteration 3 is 1000 again?

terriblefire wrote: ↑Thu May 11, 2023 12:54 pm I'm hoping to do a STABLE release package for this next week.

Will it be any different to iteration 3? Flashing my 1260 with a RasperryPi is a pain in the ass with the dupont cable.