Installed the RTC easy peasy

Current solutions and designs.
Post Reply
Steve
Posts: 181
Joined: Fri Sep 15, 2017 11:49 am

Installed the RTC easy peasy

Post by Steve » Fri Oct 06, 2017 7:52 am

Hey Chris,

Thanks for the RTC pcb, it works perfectly. This is replacing my old one which I bought from blackcat designs, which was so long it went under the ct60e pcb.
rtc.jpg
rtc.jpg (214.14 KiB) Viewed 320 times

User avatar
exxos
Site Admin
Site Admin
Posts: 4669
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Installed the RTC easy peasy

Post by exxos » Fri Oct 06, 2017 8:17 am

Steve wrote:
Fri Oct 06, 2017 7:52 am
Hey Chris,

Thanks for the RTC pcb, it works perfectly. This is replacing my old one which I bought from blackcat designs, which was so long it went under the ct60e pcb.
Awesome :)
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

gazak28
Posts: 13
Joined: Mon Sep 04, 2017 10:26 pm

Re: Installed the RTC easy peasy

Post by gazak28 » Mon Dec 25, 2017 10:21 pm

Hi Steve,
Gary from Australia here.
Did you use NVRAM reset to set the NVRAM or other software, as the software I am using is causing conflict.
Cheers
Gary

Steve
Posts: 181
Joined: Fri Sep 15, 2017 11:49 am

Re: Installed the RTC easy peasy

Post by Steve » Mon Apr 09, 2018 1:22 pm

gazak28 wrote:
Mon Dec 25, 2017 10:21 pm
Hi Steve,
Gary from Australia here.
Did you use NVRAM reset to set the NVRAM or other software, as the software I am using is causing conflict.
Cheers
Gary
Holy crap, I didn't see your reply! Sorry. Yes I did, I cleared out the data and then I ran the programs to set the new information.

gazak28
Posts: 13
Joined: Mon Sep 04, 2017 10:26 pm

Re: Installed the RTC easy peasy

Post by gazak28 » Tue Apr 10, 2018 7:56 am

Thanks for that Steve.

Post Reply