DaveC's H5 C1 Build

Share your building progress here!
DaveC
Posts: 125
Joined: Fri Sep 18, 2020 6:24 pm

DaveC's H5 C1 Build

Post by DaveC »

DSC_1791.JPG
DSC_1791.JPG (313.5 KiB) Viewed 3190 times

Guess I can claim to have made a start even if it's only soldering the TOS jumper pins in place. Hoping the rest of the bits I need to solder on turn up today :)
User avatar
JezC
Posts: 2081
Joined: Mon Aug 28, 2017 11:44 pm

Re: DaveC's H5 C1 Build

Post by JezC »

Good place to start @DaveC

I managed to source a few of the essential missing components last night...but didn't get to solder anything :roll:
DaveC
Posts: 125
Joined: Fri Sep 18, 2020 6:24 pm

Re: DaveC's H5 C1 Build

Post by DaveC »

Thankfully everything did turn up today.

DSC_1793.JPG
DSC_1793.JPG (318.01 KiB) Viewed 3158 times

Looks just about ready to give a test run! :D
User avatar
JezC
Posts: 2081
Joined: Mon Aug 28, 2017 11:44 pm

Re: DaveC's H5 C1 Build

Post by JezC »

Excellent!

Don't forget the obligatory Gembench picture!

:thumbup:
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: DaveC's H5 C1 Build

Post by PhilC »

@DaveC don't forget the jumper on the right 3.3v socket and the one on the clock chip.

Other than that, hopefully good to go
If it ain't broke, test it to Destruction.
User avatar
JezC
Posts: 2081
Joined: Mon Aug 28, 2017 11:44 pm

Re: DaveC's H5 C1 Build

Post by JezC »

PhilC wrote: Wed Jul 14, 2021 7:06 pm @DaveC don't forget the jumper on the right 3.3v socket and the one on the clock chip.

Other than that, hopefully good to go
@PhilC Do those need to be added to the BoM post for the H5C1?

Realised I don't have a spare 13 pin monitor socket, so will have to try and salvage one...but have pretty much all the other essential parts...
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: DaveC's H5 C1 Build

Post by PhilC »

@JezC it depends on what you want to fit. I fitted a ds1315 clock chip, oscillator etc and will put jumpers on the flashy clock socket but just temporarily I've bridged the middle two with solder.
If it ain't broke, test it to Destruction.
DaveC
Posts: 125
Joined: Fri Sep 18, 2020 6:24 pm

Re: DaveC's H5 C1 Build

Post by DaveC »

PhilC wrote: Wed Jul 14, 2021 7:06 pm @DaveC don't forget the jumper on the right 3.3v socket and the one on the clock chip.

Other than that, hopefully good to go
Have to sort those out tomorrow, might explain why it powered on but otherwise didn't seem to be working :lol:
DaveC
Posts: 125
Joined: Fri Sep 18, 2020 6:24 pm

Re: DaveC's H5 C1 Build

Post by DaveC »

DSC_1794.JPG
DSC_1794.JPG (84.14 KiB) Viewed 3109 times

It's alive! :yay:
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: DaveC's H5 C1 Build

Post by PhilC »

:cheer: :cheer: :cheer: Well done. Fun but easy wasn't it :)
If it ain't broke, test it to Destruction.
Post Reply

Return to “H5 C1 USER BUILDS”