Cable IDE 40p to ROMport.

List your Atari wares and wants here.
Post Reply
Atarieterno
Posts: 7
Joined: Sun Sep 03, 2017 10:27 am

Cable IDE 40p to ROMport.

Post by Atarieterno » Tue Oct 03, 2017 12:48 am

Hello;
Can someone sell me a cable for the ROM port of Atari ST? Attached images to facilitate understanding, the connection is 1: 1 (without crossings). I think it's the same cable used on some Ethernec devices, a female 40-pin flat cable connector on one end and small board for ROM-port on the other end.
P.S. The drawing scheme is made with powerful programs of graphic design, CAD, DTP, electronic circuits and a PC with atomic battery.

Image

Image

Image

User avatar
exxos
Site Admin
Posts: 1170
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Cable IDE 40p to ROMport.

Post by exxos » Tue Oct 03, 2017 10:43 am

Atarieterno wrote:
Tue Oct 03, 2017 12:48 am

P.S. The drawing scheme is made with powerful programs of graphic design, CAD, DTP, electronic circuits and a PC with atomic battery.
:lolbig:

I could design the pcb if needs be. I never saw one though. Maybe with ethernat from yesteryear..
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.
http://ataristeven.exxoshost.co.uk/Steem.htm Latest Steem Emulator

Atarieterno
Posts: 7
Joined: Sun Sep 03, 2017 10:27 am

Re: Cable IDE 40p to ROMport.

Post by Atarieterno » Tue Oct 03, 2017 5:56 pm

exxos wrote:
Tue Oct 03, 2017 10:43 am
I could design the pcb if needs be. I never saw one though. Maybe with ethernat from yesteryear..
Thank you for the help. If I do not find the cable then we'll talk about building one.
Greetings.

Atarieterno
Posts: 7
Joined: Sun Sep 03, 2017 10:27 am

Re: Cable IDE 40p to ROMport.

Post by Atarieterno » Tue Oct 03, 2017 7:04 pm

This is an old EtherNEC, from which I can use the piece on the right.

Image

Post Reply