Hello from the Netherlands..

New user? Tell us about yourself!
Post Reply
redhawk668
Posts: 30
Joined: Sat Jan 06, 2018 3:03 pm
Location: Netherlands

Hello from the Netherlands..

Post by redhawk668 » Fri Feb 09, 2018 8:02 pm

Hello there,

I’ve became a momber of this forum some time ago. I think it is time that I introduce myself. Ok, let’s go... Well, my first steps in the world of IT was with a Sinclair ZX81, then the Sinclair ZX Spectrum. From that I went to the Atari 8 Bit, starting with an Atari 800XL with a 1050 drive, then a 130 XE with a XF551 drive. When I saw an Amiga 1000 for the first time I was blown away, only this machine was too expensive so we bought a 520 STM with floppydrive instead, I really liked that machine and soon the 520 STM was sold and we got two 1040 STFM’s, one for me and one for my dad. When the STE was released, I sold my 1040 STFM and got an STE. In 1994 I went to the PC because I needed one for my education at the time. In that time I sold all my Atari stuff.

Fast forward to present time, I now own 4 Atari ST machines, one STE with a CosmosEx device, one 520 STFM, which has been upgraded with a Blitter and 4 mb (SMD soldering). This machine also has a CosmosEx. One STFM with Exxos 4 mb expansion and a STF with Gotek. Next to this, I own some Amiga’s, two 500’s (one will receive a TF530) and a 1200, Atari 8 bit stuff. One 600 XL, modified with Ultimate 1 mb, a 130XE, which I upgraded to 320 kb and a totally stock Atari 800XL.

Rest of my retro stuff, ZX Spectrum +, ZX Spectrum (this was a 16 K model, which has been upgraded to 48 K by me), both of them are refurbished by me. And three self built clones.

Yes, I am a retro nut. I taught myself how to solder building those ZX Spectrum clones and at the moment I am starting with SMD soldering. The TF530 is a great project to learn SMD soldering. My 520STFM is a late revision which is SMD, my dad did the 4 mb upgrade and I did the Blitter upgrade. First SMD project I did myself. Soldering a PLCC chip, at first not succesfully, but after resoldering and the use of lots of flux it has been a succes and the machine is still working with Blitter.

Well, that’s pretty much my introduction.
Total retro nut, my collection: 1040 STE, TOS 2.06, 4 mb, CosmosEx - 520 STFM, TOS 1.04, 4 mb, Blitter, CosmosEx - 520 STFM, TOS 1.04, 4 mb - 1040 STF, TOS 1.04, 1 mb, Gotek - Amiga 1200 with Blizzard 1220/4 - Amiga 500 + ACA500 - Amiga 500 + TF530, 1 mb chipram hack.

Atari 8 bit: 800XLF, stock - 600XL, Ultimate 1 mb, Sophia RGB - 130XE, 320 kb, Sophia RGB

Sinclair stuff: ZX Spectrum Plus - ZX Spectrum 48 kb and self built clones.

Commodore 64 + Pi1541 disk drive emulator

User avatar
exxos
Site Admin
Site Admin
Posts: 4529
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Hello from the Netherlands..

Post by exxos » Sun Feb 11, 2018 12:57 pm

:welcomewave:
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
arf
Posts: 66
Joined: Sun Oct 29, 2017 9:30 am

Re: Hello from the Netherlands..

Post by arf » Sun Feb 11, 2018 11:20 pm

redhawk668 wrote:
Fri Feb 09, 2018 8:02 pm
Hello there,

I’ve became a momber of this forum some time ago. I think it is time that I introduce myself. […]
Welcome!
--
Against signature spam!

Post Reply