Hello from the USA

New user? Tell us about yourself!
Post Reply
User avatar
PaulJ
Posts: 294
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Hello from the USA

Post by PaulJ » Wed Sep 12, 2018 4:29 pm

Good morning folks, my name is Paul Jacobs and I live in the USA, Rhode Island to be exact. I’m a recently retired firmware engineer who’s career spans the USAF, Raytheon (Twice), Microware, and Motorola. I was CEO and janitor for Metron Inc a company I started to support the on going maintenance and improvements for Streamaster a VDSL based STB developed at Motorola during my tenure there. I spent a lot of time in Canberra Australia, Basel Switzerland, Lerici Italy and some time in France, Germany, Spain, England, China, and Hong Kong I have recently retired

Many years ago I had an Atari 520 which I enjoyed building to a maximum capability for the time. Unfortunately at the time I moved on to PC’s and windoze which I have come to regret. At the time I liquidated all my hardware and software which I now see as a big mistake. Now I am working on rebuilding my stable of Atari machines and software. Todate I have managed `to obtain an Mega STE, two Mega 4’s, and a number of STF, one of which I have maxed out using Chris enhancements. I’m not much of a gamer but like development of tools and hardware for Motorola based hardware. Anyone know where I can obtain a copy Mark Williams C?

One of my goals for retirement is becoming proficient at making PC boards. My best efforts to date are 30 years ago when I made double sided boards via photo sensitized boards. For the day they were pretty good but by todays standards they are crap.

I have just purchased Chris’s new Atari ST board and will be playing catch up on its construction. I look forward to working with the people building the board.

Regards
Paul

Petari
Trusted Guru
Trusted Guru
Posts: 558
Joined: Tue Nov 28, 2017 1:32 pm

Re: Hello from the USA

Post by Petari » Wed Sep 12, 2018 4:58 pm

Welcome back to Atari waters :D
Mark Williams C here: https://mega.nz/#F!4JVH3ayK!Bu5-bDni0flCfau3KoTJvA
There is 2 kind of people: one thinking about moving to Mars after here becomes too bad, the others thinking about how to keep this planet habitable.

Atarian Computing
Posts: 260
Joined: Tue Aug 22, 2017 4:27 am

Re: Hello from the USA

Post by Atarian Computing » Wed Sep 12, 2018 5:05 pm

PaulJ wrote:
Wed Sep 12, 2018 4:29 pm
Good morning folks, my name is Paul Jacobs and I live in the USA, Rhode Island to be exact. I’m a recently retired firmware engineer who’s career spans the USAF, Raytheon (Twice), Microware, and Motorola. I was CEO and janitor for Metron Inc a company I started to support the on going maintenance and improvements for Streamaster a VDSL based STB developed at Motorola during my tenure there. I spent a lot of time in Canberra Australia, Basel Switzerland, Lerici Italy and some time in France, Germany, Spain, England, China, and Hong Kong I have recently retired

Many years ago I had an Atari 520 which I enjoyed building to a maximum capability for the time. Unfortunately at the time I moved on to PC’s and windoze which I have come to regret. At the time I liquidated all my hardware and software which I now see as a big mistake. Now I am working on rebuilding my stable of Atari machines and software. Todate I have managed `to obtain an Mega STE, two Mega 4’s, and a number of STF, one of which I have maxed out using Chris enhancements. I’m not much of a gamer but like development of tools and hardware for Motorola based hardware. Anyone know where I can obtain a copy Mark Williams C?

One of my goals for retirement is becoming proficient at making PC boards. My best efforts to date are 30 years ago when I made double sided boards via photo sensitized boards. For the day they were pretty good but by todays standards they are crap.

I have just purchased Chris’s new Atari ST board and will be playing catch up on its construction. I look forward to working with the people building the board.

Regards
Paul
Welcome! Sound's like you'll fit in just fine.

Josh.

Forgottenmyname
Trusted Guru
Trusted Guru
Posts: 684
Joined: Fri Mar 23, 2018 8:22 pm

Re: Hello from the USA

Post by Forgottenmyname » Wed Sep 12, 2018 6:00 pm

Welcome

And good luck with your STF rebuild... Just finishing mine tonight I hope

User avatar
Smonson
Posts: 211
Joined: Sat Oct 28, 2017 10:21 am

Re: Hello from the USA

Post by Smonson » Wed Sep 12, 2018 9:40 pm

Hi Paul! Coincidentally, I'm based in Canberra myself and was a firmware developer for a year. Welcome to the Exxos community.

There's never been a better time in history to learn how to get PCBs made. With all free tools you can have 10 boards made for less than 35AUD. I would be happy to help anytime 😁

User avatar
arf
Posts: 67
Joined: Sun Oct 29, 2017 9:30 am

Re: Hello from the USA

Post by arf » Wed Sep 12, 2018 9:58 pm

PaulJ wrote:
Wed Sep 12, 2018 4:29 pm
Good morning folks, my name is Paul Jacobs and I live in the USA, Rhode Island to be exact.
Welcome to the crowd!
--
Against signature spam!

User avatar
PaulJ
Posts: 294
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: Hello from the USA

Post by PaulJ » Wed Sep 12, 2018 10:14 pm

I appreciate the warm welcome and the link to MWC, I have been looking for it for some time. I've been ordering parts for a couple day and stripping mostly connectors off a spare board. I'll be playing catch up but I'll be able to take advantage of fixes other find while I'm getting all the parts together.

Smonson, I had a great time in Canberra, people are very friendly there. They had a great bike path that circled the lake which I spent some time on. What layout program would you recommend? Eagle used to be a good choice from what I'm told but now thats its changed hands they want a yearly maintenance fee which I would like to avoid.

Thanks All

User avatar
Smonson
Posts: 211
Joined: Sat Oct 28, 2017 10:21 am

Re: Hello from the USA

Post by Smonson » Thu Sep 13, 2018 12:18 am

PaulJ wrote:
Wed Sep 12, 2018 10:14 pm
What layout program would you recommend? Eagle used to be a good choice from what I'm told but now thats its changed hands they want a yearly maintenance fee which I would like to avoid.
Eagle seems to be the best choice in terms of quality and features (I believe that's what Exxos uses), but I use only Kicad, because it's open-source. It's somewhat supported by CERN, and it is very capable of everything important that you need to do (an example of what it's not very good for: drawing logos).

People say it has a weird user interface, but it's similar to other CAD programs I've used in the past.

Atarian Computing
Posts: 260
Joined: Tue Aug 22, 2017 4:27 am

Re: Hello from the USA

Post by Atarian Computing » Thu Sep 13, 2018 4:26 am

KiCad is my EDA of choice after trying the other options.

Post Reply