STE TOS 1.06/1.62 to TOS 2.06 EPROM UPGRADE

Upgrade or replace the ROM.
Post Reply
User avatar
exxos
Site Admin
Site Admin
Posts: 4625
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

STE TOS 1.06/1.62 to TOS 2.06 EPROM UPGRADE

Post by exxos » Mon Feb 05, 2018 10:24 pm

One of the easier and semi-popular STE upgrades is upgrading the TOS to 2.06. TOS2.06 is the last TOS version for ST/STE computers which include various bug fixes, 1.44 MB disk support (you still need a floppy upgrade kit to use 1.44 floppy's) , memory test. Adds GTP program support (GEM-Takes-Parameters). Greatly enhanced GEM GUI. IDE hard disk booting. Atari logo display at boot-up. Automatic cold boot memory test. Supports higher resolutions.

(Note you cannot upgrade STFM TOS this way, it requires a lot of hacks to get TOS206 working on the STFM)

So far I have seen 2 types of jumper links. First one is where there are 3 resistor looking links, and another type where there are 2 resistor looking links. These are printed as W102, W103, W104, where W103 may be a resistor looking like, or linked on the PCB itself as shown on the image on the right. Depending what TOS you have installed, the links may also be in different combinations or different sized ROM IC.

TOS106.jpg
TOS106.jpg (128.71 KiB) Viewed 785 times

To fit TOS206 you simply remove the old ROM's IC's then change the jumper links as shown below.

Note that W103 is wired on the PCB itself on my motherboard, so there is no need for a wire link for me. If your PCB is not linked, then you need to link them, a small link of wire is perfectly acceptable, you do not have to use the resistor looking links.

TOS206.jpg
TOS206.jpg (141.79 KiB) Viewed 785 times

That's it done! Now if all goes well , you should see the Atari logo come up :) TOS2.06 is a lot "nicer" to use on the STE. Though please note upgrading TOS can break some software, but fixes are being done for popular games to be compatible.


There is also my DUAL TOS kit as shown here which gives TOS1.62 & TOS2.06.
viewtopic.php?f=16&t=275

TOS206 ROMS can be found below in my store.
https://www.exxoshost.co.uk/atari/last/storenew/#0012

Or if you want to burn your own ...
viewtopic.php?f=25&t=116
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

stephen_usher
Posts: 173
Joined: Mon Nov 13, 2017 7:19 pm
Location: Oxford, UK.
Contact:

Re: STE TOS 1.06/1.62 to TOS 2.06 EPROM UPGRADE

Post by stephen_usher » Tue Feb 06, 2018 6:30 pm

I replaced the "resistors" with sets of three posts so that I could use jumpers. This allows an easy swap back to the original configuration without de-soldering/soldering.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.

Post Reply