[pics] 1.62/2.06 switcher build
Posted: Sun Oct 22, 2017 12:54 pm
Hi All,
some new pics on building up the STe switcher, just to show how easy it is, in case anyone is putting off ordering one due to soldering worries
pics were taken with a 'go pro' cheap knockoff I'm experimenting with, so not the best quality, but there are better pics I did on another build here: http://www.spiny.org/atari/photos/exxos ... index.html
I have three of these kits now, and they are well worth the upgrade. If you just use the jumper rather than drill thecase for a switch, it's possible to go back to stock too.
to make sure the pins are straight, I put them in a socket firts, then line them up on the board. all done
some new pics on building up the STe switcher, just to show how easy it is, in case anyone is putting off ordering one due to soldering worries
pics were taken with a 'go pro' cheap knockoff I'm experimenting with, so not the best quality, but there are better pics I did on another build here: http://www.spiny.org/atari/photos/exxos ... index.html
I have three of these kits now, and they are well worth the upgrade. If you just use the jumper rather than drill thecase for a switch, it's possible to go back to stock too.
to make sure the pins are straight, I put them in a socket firts, then line them up on the board. all done