Falcon Fan slow down

Various tweaks and fixes from video ghosting to audio fixes etc.
Post Reply
User avatar
Site Admin
Site Admin
Posts: 7832
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK

Falcon Fan slow down

Post by exxos » Mon Sep 03, 2018 3:04 pm

I fitted a 7808 Regulator as shown to slow down the Falcon fan making it quieter.

2 regulator pins solder into the motherboard as shown. The right leg is bent upwards and connected to the fan only. The middle regulator pin is 0v and also needed for the fan.

I am sourcing some replacements fans as well. Though the air flow is higher and they still give more air flow at 8V than the original (they are very quiet). Will add them to my store in the future.

This can be done to any falcon if the fan noise is to loud. Though I do also recommend removing the sticker and placing a small drop of oil on the spindle as well.

IMG_3153.JPG (1.78 MiB) Viewed 1342 times
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

Posts: 159
Joined: Mon Aug 28, 2017 11:22 pm

Re: Falcon Fan slow down

Post by mikro » Mon Sep 03, 2018 7:03 pm

Great - I've just replaced the fan too and wondering about the same. The new fan is quieter, it still feels like pumping a bit too much to it so something like this would be really useful (and far better than soldering a resistor).

User avatar
Posts: 520
Joined: Thu Aug 17, 2017 1:18 pm

Re: Falcon Fan slow down

Post by DrF » Tue Sep 04, 2018 7:36 am

What about a temperature controlled fan, speeds up as gets hotter, runs low normally that sort of thing?

Or we be back on about passive cooling and hope :)

Posts: 99
Joined: Tue Jul 31, 2018 7:08 pm

Re: Falcon Fan slow down

Post by KyleB » Tue Sep 04, 2018 5:39 pm

That's the thing that puzzles me, the engineers must have thought it was necessary or else they wouldn't of put it there. But none of the chips have heatsinks, they're all (as standard) clocked a lot lower than their real capability, and the air it pulls in just goes along the keyboard and out of the vents without touching anything.

Post Reply

Return to “TWEAKS & FIXES”