MEGA ST BLITTER INSTALL
Posted: Sun Jun 03, 2018 11:09 am
If your MEGA hasn't had a blitter fitted from factory, you can easily fit one..
However, there are 2 solder jumpers (circled in red) which need to be removed in order to use the blitter...
Incidentally, if you remove the blitter you have to put the solder jumpers back in place.. though nobody wants to do that
However, there are 2 solder jumpers (circled in red) which need to be removed in order to use the blitter...
- mega_blitter.jpg (287.13 KiB) Viewed 2869 times
Incidentally, if you remove the blitter you have to put the solder jumpers back in place.. though nobody wants to do that