Page 1 of 1

MEGA ST BLITTER INSTALL

Posted: Sun Jun 03, 2018 11:09 am
by exxos
If your MEGA hasn't had a blitter fitted from factory, you can easily fit one..

However, there are 2 solder jumpers (circled in red) which need to be removed in order to use the blitter...

mega_blitter.jpg
mega_blitter.jpg (287.13 KiB) Viewed 792 times

Incidentally, if you remove the blitter you have to put the solder jumpers back in place.. though nobody wants to do that :)