My own first ST project.

Blogs & guides and tales of woo by forum members.
User avatar
PhilC
Moderator
Moderator
Posts: 1809
Joined: Fri Mar 23, 2018 8:22 pm

Re: My own first ST project.

Post by PhilC » Sun Jan 06, 2019 7:02 pm

The above is presuming you are looking at the ST, not the cart
If it ain't broke, test it to Destruction.

User avatar
PhilC
Moderator
Moderator
Posts: 1809
Joined: Fri Mar 23, 2018 8:22 pm

Re: My own first ST project.

Post by PhilC » Sun Jan 06, 2019 7:10 pm

Actually, found it, 1,3,5,7,9 etc top and 2,4,6,8,10 etc for bottom, from left to right
If it ain't broke, test it to Destruction.

User avatar
PhilC
Moderator
Moderator
Posts: 1809
Joined: Fri Mar 23, 2018 8:22 pm

Re: My own first ST project.

Post by PhilC » Sun Jan 06, 2019 9:17 pm

So this is what I've got so far:
Screenshot 2019-01-06 at 21.15.15.png
Screenshot 2019-01-06 at 21.15.15.png (45.89 KiB) Viewed 757 times
Next to learn what to do with bigger ROMS etc. might even order one of these anyway, to see if it works :)
If it ain't broke, test it to Destruction.

User avatar
Icky
Moderator
Moderator
Posts: 1361
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: My own first ST project.

Post by Icky » Mon Jan 07, 2019 8:18 am

Forgottenmyname wrote:
Sun Jan 06, 2019 9:17 pm
So this is what I've got so far:

Screenshot 2019-01-06 at 21.15.15.png

Next to learn what to do with bigger ROMS etc. might even order one of these anyway, to see if it works :)
:thumbup: looking good. You may have the same problem I did with an ST in its case. You may want to extend the connector a bit so it fits in to the socket giving the case some clearance.

User avatar
PhilC
Moderator
Moderator
Posts: 1809
Joined: Fri Mar 23, 2018 8:22 pm

Re: My own first ST project.

Post by PhilC » Mon Jan 07, 2019 9:38 am

Thanks for the advice Icky, I did look into getting this made but will skip this one and head straight for the next revision I think.
If it ain't broke, test it to Destruction.

Post Reply

Return to “MEMBER BLOGS”