Page 3 of 3

Re: My own first ST project.

Posted: Sun Jan 06, 2019 7:02 pm
by PhilC
The above is presuming you are looking at the ST, not the cart

Re: My own first ST project.

Posted: Sun Jan 06, 2019 7:10 pm
by PhilC
Actually, found it, 1,3,5,7,9 etc top and 2,4,6,8,10 etc for bottom, from left to right

Re: My own first ST project.

Posted: Sun Jan 06, 2019 9:17 pm
by PhilC
So this is what I've got so far:
Screenshot 2019-01-06 at 21.15.15.png
Screenshot 2019-01-06 at 21.15.15.png (45.89 KiB) Viewed 3145 times
Next to learn what to do with bigger ROMS etc. might even order one of these anyway, to see if it works :)

Re: My own first ST project.

Posted: Mon Jan 07, 2019 8:18 am
by Icky
Forgottenmyname wrote: Sun Jan 06, 2019 9:17 pm So this is what I've got so far:

Screenshot 2019-01-06 at 21.15.15.png

Next to learn what to do with bigger ROMS etc. might even order one of these anyway, to see if it works :)
:thumbup: looking good. You may have the same problem I did with an ST in its case. You may want to extend the connector a bit so it fits in to the socket giving the case some clearance.

Re: My own first ST project.

Posted: Mon Jan 07, 2019 9:38 am
by PhilC
Thanks for the advice Icky, I did look into getting this made but will skip this one and head straight for the next revision I think.