PhilCs blog / the latest things hes broken(fixed)

[exxos]

[Icky]

@PhilC - Nice!

Should take about 5-6 days but don't forget the import duty

[rubber_jonnie]

Patched TOS 1.04 with the IDE patch, and it works fantastically.

Will post a boot up video and links later.

[PhilC]

Patched TOS 1.04 with the IDE patch, and it works fantastically.

Will post a boot up video and links later.

Well done, IDE with good compatibility

[PhilC]

These arrived in the post today.

20200414_105458.jpg (509.99 KiB) Viewed 3697 times

The larger one is the Megabus to 68k socket adaptor. The idea behind this is that a Mega ST can use two 68k upgrades without stacking

The smaller one is a Megabus to IDE adaptor but with inline buffers. Its based on the PP interface. I've added an ATF22V10 instead of the Gal as the chips are still easily obtained.

[exxos]

You could move that LS chip into the GAL now you got a 22V10. PP only used it for its open collector, as the 16V8 couldn't do that. The 22V10 can.

[PhilC]

You could move that LS chip into the GAL now you got a 22V10. PP only used it for its open collector, as the 16V8 couldn't do that. The 22V10 can.

Sounds like a plan for version 2 then

[Icky]

Nice!

I see JLC are sending out insulation tape with all their PCB orders now.

[PhilC]

Nice!

I see JLC are sending out insulation tape with all their PCB orders now.

I didn't have any green but now I do

[rubber_jonnie]

Ahh, cool, be interested in your IDE results