Page 8 of 71
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Thu Jun 27, 2019 9:15 pm
by exxos
PhilC wrote: ↑Thu Jun 27, 2019 9:12 pm
I think I'd need to download 3 million windows 3.1 installation disks on 360k floppy first though right?
Thought there was a DOS version ? Or maybe it was in Qbasic...
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Thu Jun 27, 2019 9:17 pm
by PhilC
I'm going to dig out a copy of commander keene over the weekend.
It'd be pretty easy to make a modern version of this board now, 1 NEC V30, a CPLD and a few caps and diodes.
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Thu Aug 01, 2019 8:33 pm
by PhilC
Bit quiet on my blog lately thanks to real life getting in the way.
Thanks to exxos, been working on his VGA adaptor today. I did have two of the UBESwitch ones before and although they have more features I found them a little too fragile. I'd managed to break off the button on both and the headphone socket on another.
Granted, I was plugging it in and out quite frequently, so this didnt help.
Exxos has designed an adaptor that uses some through hole components and a simple jumper for mono / colour selection. This will make for a simpler, cheaper and more robust VGA adaptor.
Here's the nearly finished article, minus the headphone socket as I need to desolder one from an old radio on the shelf behind me.
- 20190801_193004.jpg (113.64 KiB) Viewed 3935 times
The other difference between the UBE version and this one is that exxos has done away with the 3 RGB adjustment pots, which were a bit of a pain to get right. Instead exxos has used 3 voltage dividers to control the monitor brightness, ghosting, etc.
My job today has been to try a few different variations for the voltage dividers and hopefully we are somewhere near now.
Have a look below, not too shabby on my old NEC if I do say so myself.
- 20190801_193054.jpg (239.79 KiB) Viewed 3935 times
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Thu Aug 01, 2019 8:40 pm
by exxos
Yeah the pots (now resistors) were set as high of brightness as I could get them before I got odd colour bleeding/ghosting issues. It was to much of a pain to adjust them anyway.
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Thu Aug 01, 2019 8:41 pm
by derkom
Looking very nice indeed!
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Thu Aug 01, 2019 11:00 pm
by PaulJ
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Fri Aug 02, 2019 10:07 pm
by exxos
If I could actually find the bag of audio connectors I would send you one!
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Fri Aug 02, 2019 10:47 pm
by PhilC
exxos wrote: ↑Fri Aug 02, 2019 10:07 pm
If I could actually find the bag of audio connectors I would send you one!
Cool, thanks. Do you have a plan for a case yet? Btw, angled headers seem to work pretty well for the mono / colour jumper but might find a toggle switch that fits too.
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Fri Aug 02, 2019 10:50 pm
by exxos
PhilC wrote: ↑Fri Aug 02, 2019 10:47 pm
Cool, thanks. Do you have a plan for a case yet? Btw, angled headers seem to work pretty well for the mono / colour jumper but might find a toggle switch that fits too.
No plans to do a case. Not even finished the RTC case yet
Re: FMNs blog / the latest things hes briken(fixed)
Posted: Fri Aug 02, 2019 10:51 pm
by PhilC
Ok, might add it to my list. Pink to match your monitor?