Page 1 of 1

MegaST to be restored

Posted: Fri Sep 01, 2017 4:48 pm
by Anzac
This is a long term project, but just wanted to share the machine status and revisions. maybe this one will be good only for display and collection purposes or to remove parts.
MegaST_6.JPG
MegaST_6.JPG (154.86 KiB) Viewed 2881 times
MegaST_5.JPG
MegaST_5.JPG (161.21 KiB) Viewed 2881 times
MegaST_4.JPG
MegaST_4.JPG (111.39 KiB) Viewed 2881 times
MegaST_3.JPG
MegaST_3.JPG (140.45 KiB) Viewed 2881 times
MegaST_2.JPG
MegaST_2.JPG (147.29 KiB) Viewed 2881 times
MegaST_1.JPG
MegaST_1.JPG (139.96 KiB) Viewed 2881 times

Re: MegaST to be restored

Posted: Fri Sep 01, 2017 6:08 pm
by rpineau
"to be restored".. so it doesn't work ?
Can you describe what it does ? (or doesn't do :) ).
Rodolphe

Re: MegaST to be restored

Posted: Fri Sep 01, 2017 7:02 pm
by Anzac
never tried to run it. considering the amount of dirt and corrosion, i wouldn´t feel safe in doing it before checking critical parts.

Re: MegaST to be restored

Posted: Fri Sep 01, 2017 7:14 pm
by rpineau
Corrosion is indeed a potential issue.
Rodolphe

Re: MegaST to be restored

Posted: Fri Sep 01, 2017 8:21 pm
by exxos
This may be better in the "blog" section ?

Re: MegaST to be restored

Posted: Sat Sep 16, 2017 12:15 am
by Anzac
Step 1:
the Chinon D357 is STILL working!
tried it on the MSTE and it formats, reads and writes.... amazing.

(moving to blog ok for me. can i do it or has to be admin?)

Re: MegaST to be restored

Posted: Sun Sep 17, 2017 11:23 am
by exxos
Anzac wrote:
Sat Sep 16, 2017 12:15 am
(moving to blog ok for me. can i do it or has to be admin?)
Done :)