Turns out I had got the extruded fan and the cooling fan wired wrong way around Luckily I could easily change this in firmware..
So now currently printing, wish me luck... Where she stops nobody knows!
EDIT:
Ahhh FFS!
Code: Select all
SENT: G1 X26.017 Y-1.737 E0.0769
WARNING: Firmware unresponsive. Attempting to force continue...
SENT: M105
SENT: G1 X21.897 Y-1.966 E0.2415
WARNING: Firmware unresponsive. Attempting to force continue...
SENT: M105
WARNING: Firmware unresponsive. Attempting to force continue...
SENT: M105
WARNING: Firmware unresponsive. Attempting to force continue...
SENT: M105
SENT: G1 X21.881 Y-1.666 E0.2535
Total build time: 70.79 minutes
Disconnected.
Attempting connection at \\.\COM3...
Testing plaintext communication protocol...
Testing binary communication protocol...
Testing alternate communication protocols...
Connection failed.