exxos blog - random goings on

[exxos]

New toy

IMG_5798.JPG (418.23 KiB) Viewed 3292 times

[Icky]

Nice - now waiting to see the Christmas lights display @exxos

[PhilC]

Wondering how many bodge wires will be required.

[exxos]

Had enough of how loud the fans were on my PC even when running at minimum speed. So Influenced by Linus tech tips and his Noctua fans.. Actually specification wise they are half the noise of my existing fans.. But half of the noises from the bearings which I was looking for FDB types, but the noctua ones appear to be basically the same thing, or at least not using bearings! As with most things, less noise equals less airflow.. But I have 3x 120mm fans around the CPU which should be perfectly fine even running at half the airflow as before.. Of course the fans are running at minimum speed and will ramp up if the CPU heats up more, but worse case it can only really go as loud as it was before anyway.. Overall it is so much quieter it is unbelievable.. Id say 95% less fan noise.. It was almost deafening before right next to my head!

Now for the crappy dusty images...

Decided to keep my old PSU and put a new fan in it..

IMG_5823.jpg (67.44 KiB) Viewed 3211 times

Checking the fan will look like it fits..

IMG_5819.jpg (69.66 KiB) Viewed 3211 times

Look at my feking expensive 80mm fan with its buggy bumpers

IMG_5820.jpg (60.48 KiB) Viewed 3211 times

Wow how easy is this to change the fan!

IMG_5821.jpg (48.91 KiB) Viewed 3211 times

Fitted in place..

IMG_5822.jpg (51.54 KiB) Viewed 3211 times

Cable management check! *shoves*

IMG_5824.jpg (55 KiB) Viewed 3211 times

120mm fan about to go in..

IMG_5825.jpg (48.12 KiB) Viewed 3211 times

Odd that the 80mm fan came with lots of cables, but the 120mm came with nothing but screws

IMG_5827.jpg (33.71 KiB) Viewed 3211 times

Rear fan fitted!

IMG_5826.jpg (39.82 KiB) Viewed 3211 times

Thing of beauty joy forever And I went for spaced pins so they did not block with just as easy... I guess they still block up over time then

IMG_5828.jpg (64.16 KiB) Viewed 3211 times

CPU fan fitted.

IMG_5829.jpg (72.49 KiB) Viewed 3211 times

Removing the top plastic vent things.. what fun that was..

IMG_5830.jpg (53.62 KiB) Viewed 3211 times

Some more dust for your enjoyment..

IMG_5831.jpg (72 KiB) Viewed 3211 times

Could not get at the back screws on the banter that to rip off the top section of the case as well

IMG_5832.jpg (47.21 KiB) Viewed 3211 times

Old top case fan a bit dusty

IMG_5833.jpg (53.14 KiB) Viewed 3211 times

Why are the fan headers in the most impossible place to get at

IMG_5834.jpg (30.1 KiB) Viewed 3211 times

Front of the case gets ripped off so I can remove the front fan.. It was useful in the past to have a bit of airflow over the hard drives, but as there is only one large driving there now, all the others are SSD..

IMG_5835.jpg (56.81 KiB) Viewed 3211 times

Not like that from firm was doing much anyway it seems...

IMG_5837.jpg (58.32 KiB) Viewed 3211 times

A bit more dust..

IMG_5838.jpg (33.82 KiB) Viewed 3211 times

Another stupid bit to remove...

IMG_5840.jpg (57.32 KiB) Viewed 3211 times

Pile of old fans..Of which I am not a fan of! boom boom tsk!

IMG_5841.jpg (53.4 KiB) Viewed 3211 times

To bid metal panel off and more dust...

IMG_5842.jpg (56.19 KiB) Viewed 3211 times

Cleaned covers back on..

IMG_5844.jpg (56.61 KiB) Viewed 3211 times

... and done!

IMG_5845.jpg (50.7 KiB) Viewed 3211 times

Now the brick hard drive hass turned off, the volume is just half again on the PC

[Steve]

So much dust lol, this is what happens when you have cats.

[exxos]

So much dust lol, this is what happens when you have cats.

No cats here Like 10 years dust with no cats, or 6 month with cats.. girlfriends old PC I hacksawed the side off the case and put a car air filter on it the dust was that much of a problem.

[exxos]

Odd resistor.. just has a red dot

Capture.PNG (515.47 KiB) Viewed 3062 times

[PhilC]

Aren't those usually fuses?

[exxos]

Aren't those usually fuses?

Was these https://www.mouser.co.uk/ProductDetail/ ... R-7W100RL/

[exxos]

Forgot all about these boards until I found them just...

These are mostly for original machines using a floppy drive which needs a twist in the cable... These boards will un-twist the cable and they also have the resistor mods on there.. so we should not have to do the resistor mod on the 1772 buffers..

IMG_5912.JPG (364.14 KiB) Viewed 2981 times