Page 19 of 109

Re: exxos blog - random goings on

Posted: Thu May 23, 2019 1:26 pm
by exxos
rubber_jonnie wrote:
Thu May 23, 2019 10:00 am
Damn me and my weak will, I just fed Harry again, 2 PSU leads and an IDE interface.....

I am so weak and have no will of my own......
:lolbig: :bravo:

Re: exxos blog - random goings on

Posted: Thu May 23, 2019 2:49 pm
by exxos
This bunch of crap just turned up... I guess I will have to sort it all out now..

IMG_4201.JPG
IMG_4201.JPG (91.64 KiB) Viewed 1064 times

Re: exxos blog - random goings on

Posted: Thu May 23, 2019 7:01 pm
by PhilC
Nah, just throw it in the pile with all the other long lost boards, never to be seen again :P :D

Well, except the VGA adaptor boards, I like them ;)

Re: exxos blog - random goings on

Posted: Thu May 23, 2019 7:05 pm
by exxos
PhilC wrote:
Thu May 23, 2019 7:01 pm
Nah, just throw it in the pile with all the other long lost boards, never to be seen again :P :D

Well, except the VGA adaptor boards, I like them ;)
Yeah.. So many projects all arriving at once again :roll:

Re: exxos blog - random goings on

Posted: Thu May 23, 2019 7:08 pm
by PhilC
exxos wrote:
Thu May 23, 2019 7:05 pm


Yeah.. So many projects all arriving at once again :roll:
Lemme know if you need a hand, I ave some time somewhere in between sleeping and going to work..... somewhere.....

Re: exxos blog - random goings on

Posted: Thu May 23, 2019 10:09 pm
by exxos
rubber_jonnie wrote:
Thu May 23, 2019 9:01 am
Not impressed, the print job stopped about 2 hours in for some reason. At first I thought my print server had rebooted, but no. No logs as to why it stopped either. Need to print it again now :(
On no.. to many hops and jumps ;)

Re: exxos blog - random goings on

Posted: Fri May 24, 2019 2:53 pm
by exxos
oooo found me a Virgin F2 TOS104 :shock: :shock: Oddly the PSG is in a socket, but original solder..

IMG_4221.JPG
IMG_4221.JPG (144.2 KiB) Viewed 1026 times

Re: exxos blog - random goings on

Posted: Fri May 24, 2019 3:56 pm
by exxos
Really need to get me one of these...

large-3d-printers3.jpg
large-3d-printers3.jpg (97.94 KiB) Viewed 1020 times

http://www.modix3d.com/?affcode=g994868 ... gLeWPD_BwE

Re: exxos blog - random goings on

Posted: Fri May 24, 2019 4:01 pm
by PhilC
Looks nice but between all the motherboards and the cat, you don't have any more floor space!

Bet its expensive too.

Hmmm, doubles up as a heated cat box when not in use. Set the bed temp for say 40oC? :)

Re: exxos blog - random goings on

Posted: Fri May 24, 2019 8:45 pm
by exxos
PhilC wrote:
Fri May 24, 2019 4:01 pm
Looks nice but between all the motherboards and the cat, you don't have any more floor space!
That is true. I would seriously have to love a good sort out in order to generate that much room!
PhilC wrote:
Fri May 24, 2019 4:01 pm
Bet its expensive too.
About £3,500, but its overseas, so probably end up double that cost after shipping and import taxes :roll:
PhilC wrote:
Fri May 24, 2019 4:01 pm
Hmmm, doubles up as a heated cat box when not in use. Set the bed temp for say 40oC? :)
Cat doesn't live with me so wouldn't be a problem anyway :)

But seriously, I would consider saving up and getting one of these printers with the possibility of printing STFM cases etc...