Page 6 of 14
Re: Building a DIY large bed 3D printer
Posted: Sun Oct 13, 2019 2:40 pm
by Icky
IngoQ wrote: ↑Sun Oct 13, 2019 9:21 am
This is for sure the only 3D printer specifically designed and constructed to print out ST cases
Great work, I am really looking forward to see the finished thing
Thanks. It's going to take time as I mentioned I have messed up my current printer putting in a new board and need to print a few more pieces out. Also its a bit of a modify on the go build as the dimensions are outside of a supported build for the Voron its based on.
I too can't wait to see it do its first ST case print.
Re: Building a DIY large bed 3D printer
Posted: Sun Oct 13, 2019 2:41 pm
by Icky
PhilC wrote: ↑Sun Oct 13, 2019 10:55 am
Looking good so far Icky, will be looking forward to seeing it working in person at some point.
Re: Building a DIY large bed 3D printer
Posted: Sun Oct 20, 2019 11:19 pm
by Icky
Moved onto the bottom of the printer and started to place some of the boards in. I have the Z drive steppers out as I am having some new parts kindly printed by PhilC whilst my current printer is still trying to recover from a new mainboard replacement. I know, I shouldn't have too many projects on the go at once.
With this size printer there is plenty of space for the Duet 2 and Duex 5 and will need to start putting in the PSU's, Raspberry Pi etc etc.
- IMG_4473.jpeg (142.21 KiB) Viewed 4208 times
Re: Building a DIY large bed 3D printer
Posted: Mon Oct 21, 2019 8:39 am
by PhilC
I better hurry up and print the last two lots then.
Re: Building a DIY large bed 3D printer
Posted: Thu Oct 24, 2019 7:41 am
by Icky
XY gantry belts now all in place with the toolhead block showing the Z-probe. Next task to start wiring and testing things are working as expected.
- IMG_4477.jpeg (158.59 KiB) Viewed 4156 times
Re: Building a DIY large bed 3D printer
Posted: Thu Oct 24, 2019 1:03 pm
by stephen_usher
I'll be impressed if it can produce ceramic mugs.
Re: Building a DIY large bed 3D printer
Posted: Fri Oct 25, 2019 1:29 pm
by Icky
stephen_usher wrote: ↑Thu Oct 24, 2019 1:03 pm
I'll be impressed if it can produce ceramic mugs.
I would be too
That would be a very interesting market.
Re: Building a DIY large bed 3D printer
Posted: Fri Oct 25, 2019 1:59 pm
by Icky
Most important thing for the printer is making sure you have the right boot logo on your screen
- IMG_4482.jpeg (149.22 KiB) Viewed 4120 times
Printed parts arrived from PhilC this morning (much appreciated PhilC), now need to clean them up and get the Z drive area sorted.
Re: Building a DIY large bed 3D printer
Posted: Fri Oct 25, 2019 2:54 pm
by PhilC
Re: Building a DIY large bed 3D printer
Posted: Fri Oct 25, 2019 4:49 pm
by Atarian Computing
Good choice with the Duet and Duex. I hear they are worth the higher price.