My latest Ebay purchase

Blogs & guides and tales of woo by forum members.
Post Reply
keli
Posts: 97
Joined: Tue Aug 22, 2017 1:34 pm

My latest Ebay purchase

Post by keli »

This morning, this Mega 4 arrived in the mail.
IMG_20170922_114402.jpg
IMG_20170922_114402.jpg (2.77 MiB) Viewed 3829 times
I haven't had a chance to hook it up yet (have to go to the basement an scour for cables, etc.), but the seller said the floppy drive is not working. (Floppy LED lights up but it does not read any floppies.) I have a Gotek in my old 1040 STF, so I guess I'll be swapping some hardware components around.

I like the Mega ST form factor, as it fits nicely on my desk when not in use. The Mega extension bus is also exciting -- I see potential for playing around with extensions... The internal DMA port connector could also come handy.

I opened it up, and in addition to collected dust, I noticed this thing soldered on top of the CPU:
IMG_20170922_115207.jpg
IMG_20170922_115207.jpg (338.42 KiB) Viewed 3829 times
Any ideas what it's for? The chip is a 74HTCLS74AN, which is a pair of d-type positive edge triggered flip-flops with asynchronous preset and clear inputs. It looks like it's soldered directly to pins 12-18 on the 68000 (if I've figured it out correctly), which means it's hooked to /BGACK, /BR, Vcc, CLK, GND, /HALT, and /RESET. Plus the yellow wire going to somewhere on the motherboard. Is this some form of overclocking or maybe a repair of some sort?
keli
Posts: 97
Joined: Tue Aug 22, 2017 1:34 pm

Re: My latest Ebay purchase

Post by keli »

I found it. It looks like a fix to synchronize the /BGACK coming from the blitter to the CPU clock.
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: My latest Ebay purchase

Post by exxos »

It is the blitter patch, you probably do not need it.

http://www.exxosforum.co.uk/atari/last/MEGAST/index.htm

It was just another Atari bodge to cure noise on signals which were causing the letter to malfunction on some production runs.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
keli
Posts: 97
Joined: Tue Aug 22, 2017 1:34 pm

QRe: My latest Ebay purchase

Post by keli »

It also could explain what seems to be cut traces on the motherboard next to it.
IMG_20170922_115628.jpg
IMG_20170922_115628.jpg (759.63 KiB) Viewed 3805 times
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: My latest Ebay purchase

Post by exxos »

Looks like the solder pads for the blitter.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Post Reply

Return to “MEMBER BLOGS”