Well, with a couple of more bodges the board is fully functional and I can get RGBI out via the 8 pin DIN socket using a ZX Spectrum+ 128K SCART cable (as long as I don't try to fit the case on the machine).
So, these are the bodges:
Note the "professional" fitting of the DIN socket. Hehe.
New project: An ACT Apricot F1 "barn find"
- stephen_usher
- Posts: 5660
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Bodge-tastic!!!
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Re: New project: An ACT Apricot F1 "barn find"
Its to assist in port ventilation
If it ain't broke, test it to Destruction.
- stephen_usher
- Posts: 5660
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: New project: An ACT Apricot F1 "barn find"
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
- stephen_usher
- Posts: 5660
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: New project: An ACT Apricot F1 "barn find"
Now I have the RGB out I can actually capture the screen.
And capture video... Here's GEM booting on the machine. A tad slower than an ST getting to the desktop.
Oh, and the MkII board has been designed and sent off to PCBWay for manufacture.
And capture video... Here's GEM booting on the machine. A tad slower than an ST getting to the desktop.
Oh, and the MkII board has been designed and sent off to PCBWay for manufacture.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
- stephen_usher
- Posts: 5660
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: New project: An ACT Apricot F1 "barn find"
It looks like the Mk.II boards will be delivered today. I'll probably have to wait until the weekend before building one up.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
- rubber_jonnie
- Site Admin
- Posts: 10604
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: New project: An ACT Apricot F1 "barn find"
That is a truly funky looking GUI!
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
- stephen_usher
- Posts: 5660
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: New project: An ACT Apricot F1 "barn find"
It is, and without a mouse the pointer moves incrementally between items rather than moving as you would expect.
Anyway, the PCBs have arrived and finally PCBWay have dispatched the pre-built memory PCB after sitting completed for nearly two weeks. I had to prompt them to send it in the end.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
- rubber_jonnie
- Site Admin
- Posts: 10604
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: New project: An ACT Apricot F1 "barn find"
That kinda makes sense re the pointer.stephen_usher wrote: ↑Wed Sep 22, 2021 11:40 amIt is, and without a mouse the pointer moves incrementally between items rather than moving as you would expect.
Anyway, the PCBs have arrived and finally PCBWay have dispatched the pre-built memory PCB after sitting completed for nearly two weeks. I had to prompt them to send it in the end.
Surprised you had to prompt them to send the PCBs, thought they were normally pretty good.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
- stephen_usher
- Posts: 5660
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: New project: An ACT Apricot F1 "barn find"
Yeah. I think I confused them by having 5 PCBs but only one having components fitted. I got an e-mail conversation asking if the first board was correct and if they could go ahead assembling the others, which I replied that I hadn't paid for the others to be built. The day after the status changed to "Ready for dispatch" and that's how it sat for nearly two weeks.rubber_jonnie wrote: ↑Wed Sep 22, 2021 11:42 am Surprised you had to prompt them to send the PCBs, thought they were normally pretty good.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
- rubber_jonnie
- Site Admin
- Posts: 10604
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: New project: An ACT Apricot F1 "barn find"
Well at least you have them now. Is the built one complete or is there more for you to do to it?stephen_usher wrote: ↑Wed Sep 22, 2021 11:47 amYeah. I think I confused them by having 5 PCBs but only one having components fitted. I got an e-mail conversation asking if the first board was correct and if they could go ahead assembling the others, which I replied that I hadn't paid for the others to be built. The day after the status changed to "Ready for dispatch" and that's how it sat for nearly two weeks.rubber_jonnie wrote: ↑Wed Sep 22, 2021 11:42 am Surprised you had to prompt them to send the PCBs, thought they were normally pretty good.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...