Brett's STE - Repair thread

Blogs & guides and tales of woo by forum members.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10462
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Brett's STE - Repair thread

Post by rubber_jonnie »

exxos wrote: Wed Jan 26, 2022 11:23 pm Nice! Test cartridge run yet ? :hide:
No diag cart yet, but I think it may be close by :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
BrettRogersUK
Posts: 129
Joined: Wed Sep 15, 2021 12:48 am

Re: Brett's STE - Repair thread

Post by BrettRogersUK »

rubber_jonnie wrote: Wed Jan 26, 2022 11:21 pm I'm feeling like a minor celebration. I traced A1 and found that it should be connected to pin 2 of the DMA. Only it wasn't, so I hooked it up and I now get this:


IMG_20220126_230722.jpg


Which I am going to take as progress since it looks like something is getting to video RAM, something I'd not seen before.

Clearly some work left to be done, but the little red led on my diag cart which shows ROM access is now flickering, a good indicator that ROM access is at least being tried. It was completely dead up until now.

Clearly something is going on and it is trying, so more checking to be done, I'll need to look at A2 next.

I also added some test points near the GST combel and I can see that A1 & A2 are connected all the way from there to the Blitter, the CPU and finally the ROM and A1 to the DMA. I am also seeing address line pulses all the way through now too.

More to do though, @exxos another one for your crash screen archive :)
I'd call that a minor victory. Well done matey, I salute you! There's life in the old girl yet.

Yippee!!!

Regards,

Brett
User avatar
derkom
Moderator
Moderator
Posts: 1208
Joined: Sun Jul 29, 2018 6:45 pm

Re: Brett's STE - Repair thread

Post by derkom »

rubber_jonnie wrote: Wed Jan 26, 2022 11:21 pm I'm feeling like a minor celebration. I traced A1 and found that it should be connected to pin 2 of the DMA. Only it wasn't, so I hooked it up and I now get this:
Would be interesting (and possibly educational) to know where exactly the track broke. Have you narrowed that down yet?
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10462
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Brett's STE - Repair thread

Post by rubber_jonnie »

derkom wrote: Thu Jan 27, 2022 5:57 am
rubber_jonnie wrote: Wed Jan 26, 2022 11:21 pm I'm feeling like a minor celebration. I traced A1 and found that it should be connected to pin 2 of the DMA. Only it wasn't, so I hooked it up and I now get this:
Would be interesting (and possibly educational) to know where exactly the track broke. Have you narrowed that down yet?
Not sure yet tbh, this was a late last night thing so all I did was compare with my working machine and wire it up to see what happened.

Will see if I can figure it out a bit later.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10462
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Brett's STE - Repair thread

Post by rubber_jonnie »

BrettRogersUK wrote: Thu Jan 27, 2022 12:40 am
I'd call that a minor victory. Well done matey, I salute you! There's life in the old girl yet.

Yippee!!!

Regards,

Brett
Still a way to go I suspect, but I'm definitely more hopeful now.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: Brett's STE - Repair thread

Post by Icky »

Good progress @rubber_jonnie, also a good read of the diagnosis and fixes under the capable hands of Dr RJ :)
User avatar
JezC
Posts: 2081
Joined: Mon Aug 28, 2017 11:44 pm

Re: Brett's STE - Repair thread

Post by JezC »

rubber_jonnie wrote: Wed Jan 26, 2022 11:13 pm
JezC wrote: Wed Jan 26, 2022 5:56 pm @rubber_jonnie Go on - you know you want to!

:poke: :hide: :fire: :fire: :fire:
Not you too!!
Just thinking it's another skill to add to your existing set!
Also, can be very useful to help work around faults or shortages. ;)
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10462
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Brett's STE - Repair thread

Post by rubber_jonnie »

Icky wrote: Thu Jan 27, 2022 8:29 am Good progress @rubber_jonnie, also a good read of the diagnosis and fixes under the capable hands of Dr RJ :)
Thank you :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10462
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Brett's STE - Repair thread

Post by rubber_jonnie »

JezC wrote: Thu Jan 27, 2022 8:55 am
rubber_jonnie wrote: Wed Jan 26, 2022 11:13 pm

Not you too!!
Just thinking it's another skill to add to your existing set!
Also, can be very useful to help work around faults or shortages. ;)
Very true :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10462
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Brett's STE - Repair thread

Post by rubber_jonnie »

An interesting thing happened just now, I powered the STE on and got a normal black border top and bottom, no stripes.

Unfortunately I didn't get a screenshot of it, and when I turned it back on it was back to the stripey screen.

I was hoping the pixies had been in overnight to fix it, but was sadly disappointed, though it did give me a little more hope :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Post Reply

Return to “MEMBER BLOGS”