Steve's DST1 Build

[Steve]

I used the 3v3 regulator from the DFB1 (all I had) which is why it looks weird with one leg bent over. Just finished programming, will test next I'm aware @Badwolf will be ready with a new @ijor inspired firmware soon so I'll flash that as soon as it is hot off the press I could only get 50mhz Osc for this, which is fine as I ideally want to use this with a 68010 which probably won't clock as highly.

PXL_20220513_191628538.jpg (225.78 KiB) Viewed 158 times

PXL_20220513_191636697.MP.jpg (230.09 KiB) Viewed 158 times

Screenshot from 2022-05-13 20-43-27.png (130.34 KiB) Viewed 158 times

[Steve]

That's a good start

PXL_20220513_195901186.MP.jpg (360.9 KiB) Viewed 154 times

[Steve]

Just testing: EmuTOS Icons and screen redraws are black. Frontbench locks up at the same place each time, no bombs. I suspect the new firmware will fix these issues.

PXL_20220513_203628742.MP.jpg (655.46 KiB) Viewed 141 times

PXL_20220513_203657830.jpg (189.16 KiB) Viewed 141 times

[Steve]

And some YAARTT test, seems TT RAM has an issue.

PXL_20220513_204729693.MP.jpg (502.67 KiB) Viewed 136 times

[exxos]

@Steve You could try my build but it's not perfect and still has same problems as the original with alt-ram. But it may behave a little better

exxos2.zip

(9.72 KiB) Not downloaded yet

[PhilC]

Good luck with the 010 @Steve, I tried one at 32 mhz once, it booted a couple of times and then died, never to boot again.

[Badwolf]

Good start, Steve!

What's the host machine? STFM?

BW

[exxos]

Good luck with the 010 @Steve, I tried one at 32 mhz once, it booted a couple of times and then died, never to boot again.

I think I tried running one at 16MHz in my STE booster ages ago and think I gave up in the end. Those things BURN!

[PhilC]

Fun whilst it lasted @exxos

[Steve]

@Badwolf same as you actually, an STe with exxos's adapter.