MONGREL REMAKE H4 PRE-ORDER

Latest Atari related news.
Locked
User avatar
exxos
Site Admin
Site Admin
Posts: 23504
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

MONGREL REMAKE H4 PRE-ORDER

Post by exxos »

h2c.jpg
h2c.jpg (15.34 KiB) Viewed 7491 times

Price for pre-ordering is £28 each. This is for PCB ONLY.
Price does not include postage and packing costs (this will be calculated and billed individually once I have the PCBs to weigh etc)

https://www.exxosforum.co.uk/atari/store2/#0167

PRE-ORDERING WILL END ON 1ST OF NOVEMBER.

PCBs will be ordered on that date and no more orders will be taken. There will however be a small number of boards which will go on sale at a later date but will not be at the pre-ordering price.


Please see the H4 thread for current build information.
https://www.exxosforum.co.uk/forum/viewt ... =73&t=2167


My thanks to everyone involved with this project, either past present or future. This project would not have gotten off the ground if it wasn't for all the great help of our community! :thumbup:
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: MONGREL REMAKE H4 PRE-ORDER

Post by PaulJ »

Great news Exxos.. :excited:

Do you have a preferred spot to place the build directories? I am chopping up the schematic into individual sections and expanding to full page format and maybe put up some parts lists for mouser.

Also Is the pre-order through Harry. It would be convienient to order them as they were in the store since I have some other reasons to feed Harry. :) :) :)
User avatar
exxos
Site Admin
Site Admin
Posts: 23504
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: MONGREL REMAKE H4 PRE-ORDER

Post by exxos »

PaulJ wrote: Tue Sep 24, 2019 4:58 pm Do you have a preferred spot to place the build directories?
You mean member builds ? If it helps I may create a new sub forum for the H4 as its getting a bit messy with all the threads anyway now.
PaulJ wrote: Tue Sep 24, 2019 4:58 pm Also Is the pre-order through Harry.
Yeah its my "old" store, it should still be OK for the next 12 months.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: MONGREL REMAKE H4 PRE-ORDER

Post by PaulJ »

exxos wrote: Tue Sep 24, 2019 5:04 pm You mean member builds ? If it helps I may create a new sub forum for the H4 as its getting a bit messy with all the threads anyway now.
Yes, I'd like to plunk down the exploded schematic sections and maybe some mouser parts lists. Now everything is pretty scattered.
exxos wrote: Tue Sep 24, 2019 5:04 pm Yeah its my "old" store, it should still be OK for the next 12 months.
I looked in the store and the board is there at 99 pounds.. If you change it to 28 I'll buy a couple pre-orders + other things. :)
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: MONGREL REMAKE H4 PRE-ORDER

Post by PhilC »

Do you take IOU's 8-)

Will have to wait till next pay day (15th) and I will order the three boards I promised. (wife will kill me otherwise)

And I vote for the new members build bit for the H4 as it will stop some confusion between that and the Alpha.
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 23504
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: MONGREL REMAKE H4 PRE-ORDER

Post by exxos »

PaulJ wrote: Tue Sep 24, 2019 5:25 pm Yes, I'd like to plunk down the exploded schematic sections and maybe some mouser parts lists. Now everything is pretty scattered.
I have started doing new sections.
PaulJ wrote: Tue Sep 24, 2019 5:25 pm I looked in the store and the board is there at 99 pounds.. If you change it to 28 I'll buy a couple pre-orders + other things. :)
Sounds like you have a browser caching issue as it shows up like this for me...

11.jpg
11.jpg (48.12 KiB) Viewed 7461 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 23504
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: MONGREL REMAKE H4 PRE-ORDER

Post by exxos »

PhilC wrote: Tue Sep 24, 2019 5:27 pm And I vote for the new members build bit for the H4 as it will stop some confusion between that and the Alpha.
I've split it all up and moved stuff about. So there is a clean sub forum for the H4 stuff now.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
derkom
Moderator
Moderator
Posts: 1208
Joined: Sun Jul 29, 2018 6:45 pm

Re: MONGREL REMAKE H4 PRE-ORDER

Post by derkom »

Yay. Ordered. :yay: First order I think. :mrgreen:
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: MONGREL REMAKE H4 PRE-ORDER

Post by PaulJ »

Ok, Harry is properly feed. He did look a little lean. :mrgreen: :mrgreen: :mrgreen:
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: MONGREL REMAKE H4 PRE-ORDER

Post by PaulJ »

Exxos.. Icky... The 72 pin simm socket looks to be under the keyboard. Should we use a lay flat simm socket instead of the vertical?
Locked

Return to “NEWS & ANNOUNCEMENTS”