MONGREL REMAKE H4 PRE-ORDER

Post by **arkadiusz.makarenko** » Thu Oct 17, 2019 3:51 pm

exxos wrote: ↑Thu Oct 17, 2019 11:57 am 2 weeks remaining

Idea of ordering one is growing on me. May I ask what model would be the best for basis of this?
I have spare STe board and STFM case. Would I be better off with STFM board?

Post by **exxos** » Thu Oct 17, 2019 4:01 pm

arkadiusz.makarenko wrote: ↑Thu Oct 17, 2019 3:51 pm Idea of ordering one is growing on me. May I ask what model would be the best for basis of this?
I have spare STe board and STFM case. Would I be better off with STFM board?

You need a ST/F/M to rob the chips and connectors off.

Fri Oct 18, 2019 12:34 pm

exxos wrote: ↑Thu Oct 17, 2019 4:01 pm
arkadiusz.makarenko wrote: ↑Thu Oct 17, 2019 3:51 pm Idea of ordering one is growing on me. May I ask what model would be the best for basis of this?
I have spare STe board and STFM case. Would I be better off with STFM board?
You need a ST/F/M to rob the chips and connectors off.

I have ordered one.
I will break one of my 520 then

Post by **exxos** » Fri Oct 18, 2019 12:47 pm

arkadiusz.makarenko wrote: ↑Fri Oct 18, 2019 12:34 pm I have ordered one.
I will break one of my 520 then

JezC · Post by **JezC** » Sat Oct 19, 2019 11:15 pm

Just ordered the H4 board...I'm one of the few interested in having the SMT stuff pre-fitted if possible.

I'm going to shortly order some other bits from the store to be shipped with the board.

Just need to see which of my STs is going to make the ultimate sacrifice for this new board

Post by **exxos** » Sun Oct 20, 2019 12:43 pm

JezC wrote: ↑Sat Oct 19, 2019 11:15 pm Just ordered the H4 board...I'm one of the few interested in having the SMT stuff pre-fitted if possible.

I need to look into assembly for my own boards as well, but this may not happen until after xmas now as I'm getting busy work work leading up to xmas .

I need to do a whole new parts list as I will be buying parts from local suppliers and some of the parts I have in my own stock to build up a few boards so don't need to order everything. But this will take some time to do.

JezC · Post by **JezC** » Sun Oct 20, 2019 2:02 pm

No rush on my account, just wanted to support your work.
Depending on how the repairs to some of my other STs goes, I might order some parts before then & get the rest with the H4.
Just let me know when you can.

damo2929 · Post by **damo2929** » Fri Oct 25, 2019 12:34 pm

I would be interested in one of these.
whats the chances of this working first time for a novice builder ?

Post by **exxos** » Fri Oct 25, 2019 12:44 pm

damo2929 wrote: ↑Fri Oct 25, 2019 12:34 pm whats the chances of this working first time for a novice builder ?

Well this is difficult to say, because only you know your skill level for building. But this is still a dev-machine, so it may not work even if built 100% perfectly. We just don't know until people start building it. Though as these have SMT parts, I don't recommend trying to build it unless you are good at soldering.

There will be some assembled boards being done, but this will come much later, and boards still need to be pre-ordered for that, as I am not going to keep a stock of them.

damo2929 · Post by **damo2929** » Fri Oct 25, 2019 1:24 pm

when you say fully assembled or just with the SMT parts assembled ?
as I would be fine with through hole but not the SMT parts.

MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER

Re: MONGREL REMAKE H4 PRE-ORDER