New DIP64 Accelerator coming

Post by **exxos** » Sun Jan 31, 2021 5:02 pm

DoG wrote: ↑Sun Jan 31, 2021 4:54 pm JLCPCB only does 6 layers!?

That's true! Its not looking like it can easily be built

Cyprian · Post by **Cyprian** » Sun Jan 31, 2021 5:14 pm

DoG wrote: ↑Sun Jan 31, 2021 1:35 pm Copied from FB. Target: Any 68000 computer.

https://www.buffee.ca/Nearing-production/

nice project.

will it be working with the ST?

cmorley · Post by **cmorley** » Sun Jan 31, 2021 6:14 pm

exxos wrote: ↑Sun Jan 31, 2021 4:21 pm I can't see it being cheap to make..

I looked up the SOM becuase I'd never heard of them before... they start at £30+VAT ish from Mouser. The board is not going to be cheap.

Post by **Icky** » Sun Jan 31, 2021 6:50 pm

There is going to be some serious routing going on for that board. Hats off to them fitting it all in although will be a nightmare to build yourself, would definitely need an assembly place to do it for you.

TheNameOfTheGame · Post by **TheNameOfTheGame** » Sun Jan 31, 2021 7:21 pm

This is a very interesting development. Would this work on the H5 boards seeing as it is DIP?

sporniket · Post by **sporniket** » Sun Jan 31, 2021 8:30 pm

TheNameOfTheGame wrote: ↑Sun Jan 31, 2021 7:21 pm This is a very interesting development. Would this work on the H5 boards seeing as it is DIP?

If all the signals and behaviour of the 68k has been properly implemented, I believe that it could.

On the H5, if you have a free 3.3v extension port, one could also design an alternate pcb with the level shifter removed ?

Anyway not for me. I plan to go the fpga way later this year. And first things first, I need to start my H5 build...

New DIP64 Accelerator coming

Re: New DIP64 Accelerator coming

Re: New DIP64 Accelerator coming

Re: New DIP64 Accelerator coming

Re: New DIP64 Accelerator coming

Re: New DIP64 Accelerator coming

Re: New DIP64 Accelerator coming