FALCON RTC MODULES ALMOST COMPLETED

[exxos]

falcon_rtc.jpg (171.26 KiB) Viewed 1609 times

All built up, just need to find some time to test them all out


MORE INFO
viewtopic.php?f=10&t=37#p89

STORE LINK
https://www.exxoshost.co.uk/atari/last/storenew/#0089

[francouai]

that's very cool!
no need to cut the metalic shield on the Top of the NVRAM like I saw on different webpages?

[exxos]

that's very cool!
no need to cut the metalic shield on the Top of the NVRAM like I saw on different webpages?

Mostly people say the proper RTC chip fits in a socket fine, and this module isn't any taller than maybe 1mm from the original RTC.

Though until someone tries it, I really cannot say if the metal needs cutting or not... I could produce some small adapter PCB's if needs be, but I hope they not be needed.

Overall, the module should be fitted into the motherboard (Without a socket) so there shouldn't be any height issues there since people are fitting the original RTC in a socket which is taller than this module anyway.

[exxos]

Now in stock

https://www.exxoshost.co.uk/atari/last/storenew/#0089

[DrF]

You could say he has time on his hands

[exxos]

You could say he has time on his hands

I wish!

[exxos]

030_rtc.jpg (37.56 KiB) Viewed 1261 times

Small batch of 7 done today, will be in stock tomorrow


https://www.exxoshost.co.uk/atari/last/storenew/#0089

[kenedy]

That's very cool !!

[exxos]

The new blue PCBs just arrived last few purple ones which have sold in my store also have the capacitor mod done to them. These new blue PCBs also have the mod, but to prevent confusion (possibly ?) all the new blue ones well have the capacitor. The capacitor should help with a lot of screwy issues which people seem to be having. Of course I listed the capacitor mod in the main page and recommend this is done on all purple boards just to be sure.. viewtopic.php?f=10&t=37#p2479

These are all being assembled in the UK as I struggling to build them fast enough. I am hoping there will be around 25 in stock over the next couple of weeks.

IMG_2375.JPG (37.71 KiB) Viewed 987 times

[exxos]

New Falcon RTC boards heading towards stock this week

https://www.exxoshost.co.uk/atari/last/storenew/#0089

rtc.jpg (152.92 KiB) Viewed 811 times