
Any reason why the GAL needs to be socketed? If I sink it I'll be able to get my RF shields back on.

You can't put 2.06 in a stock 1040. It lives in a different location an you need some decoding for the new location. I'm waiting for Exxos's accelerator that provides the need memory decoding to use 2.06. The board you have may provide it but I don't read German so I assume it doesn't. If you do have a solution for running 2.06 other than a memory load let me know..
Oh right, I was that tired last night that it didn't click. You're the guy I bought it from.frank.lukas wrote: ↑Sat Nov 10, 2018 11:21 amYou can build two 27C010 Eproms to fit in a 28pin socket. Ask Exxos for guidance to do that. And at a CE wire to the GAL on the IDE Interface Board and ROM2 to the GAL on the IDE Interface Board. See the 1040ST schematics ...
Awesome! Thanks! The patches worked.Petari wrote: ↑Sun Nov 11, 2018 2:34 pmThere are IDE autoboot extensions for older TOS versions available: http://atari.8bitchip.info/astams.php
At bottom of page.
Always handy to havefrank.lukas wrote: ↑Sun Nov 11, 2018 2:12 pmWith TOS 2.06 Option is the IDE Interface Board plus two 27C010 TOS Eprom Adapter PCBs to put TOS 2.06 in the original 28pin TOS sockets. I can send you the two Adapter PCBs if you want ...
Yes, and I will send it via e-mail too.
Well it was free, both of them were.