1040 STF shifted video

Problems with your machine in general.
Post Reply
User avatar
sandord
Posts: 673
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

1040 STF shifted video

Post by sandord »

So, I've got another 1040 STF (C103175) in the mail last week (only the bottom part that is, no keyboard or cover).

Today I tried if it worked.

Now that lead to a little surprise: the video output seems shifted somehow. That is, only certain planes and it's not consistent across cold starts either (see different colours below).

In medium resolution the effect is the same, one plane is shifted from the other.

See for yourself:
IMG_20181110_151741.jpg
IMG_20181110_151741.jpg (110.04 KiB) Viewed 3755 times
IMG_20181110_151533.jpg
IMG_20181110_151533.jpg (58.84 KiB) Viewed 3755 times
IMG_20181110_161246.jpg
IMG_20181110_161246.jpg (177.75 KiB) Viewed 3741 times
IMG_20181110_152027.jpg
IMG_20181110_152027.jpg (179.27 KiB) Viewed 3755 times

I haven't tried anything to solve this yet, I just wanted to share this right away and ask if anyone has seen this before?
User avatar
sandord
Posts: 673
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: 1040 STF shifted video

Post by sandord »

Hmm, the desktop colour varies across resets between red, blue and grey. So every time I reset I get either the same colour or any of the other two. The end result seems to be completely random.

While running, nothing changes to this state so there's no flashing or any other distortion.
User avatar
sandord
Posts: 673
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: 1040 STF shifted video

Post by sandord »

Mistery solved, I took the shifter out and put in another one (which is going to sit on my STF Remake board soon) et voila, a nice green desktop.

I cleaned the legs of the original shifter with IPA and put it back but that didn't help so my guess is that this shifter is broken.
User avatar
sandord
Posts: 673
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: 1040 STF shifted video

Post by sandord »

The funny thing is that this particular ST is still usable in mono mode. Admitted, the right most 16 pixels are shown at the left of the screen but it's still workable. I might turn it into a MIDI machine or something ;-)
troed
Moderator
Moderator
Posts: 908
Joined: Mon Aug 21, 2017 10:27 pm

Re: 1040 STF shifted video

Post by troed »

Interesting. It's caused by a timing difference between MMU and Shifter - not really anything broken in it. What chip id is it on that Shifter?
User avatar
sandord
Posts: 673
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: 1040 STF shifted video

Post by sandord »

troed wrote: Sat Nov 10, 2018 7:11 pm Interesting. It's caused by a timing difference between MMU and Shifter - not really anything broken in it. What chip id is it on that Shifter?
That's probably true, broken chips are usually just dead chips.

The shifter reads:

CO25914-38A
PH23-024
8G5 23

I think it's interesting that a different shifter works just fine. Maybe it isn't the original one, the seller may have been swapping parts around.
User avatar
sandord
Posts: 673
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: 1040 STF shifted video

Post by sandord »

I just realised that the problematic shifter might actually work fine in the STF Remake. I haven't finished building it yet so I won't know for a little while but if it does, I can put the other shifter on this new board and all will be fine :)
User avatar
Smonson
Posts: 708
Joined: Sat Oct 28, 2017 10:21 am
Location: Canberra, Australia
Contact:

Re: 1040 STF shifted video

Post by Smonson »

For some unknown reason, this also happens to me with my FPGA shifter sometimes when there is no keyboard connected.
Post Reply

Return to “HARDWARE ISSUES”